Assembly needed for Gamma X-2

08-19-2008, 08:22 PM

the title is self-explanatory, but here's the gist: I am wondering how much of the machine is already put together and how much I have to put together...

almerickso · 08-19-2008, 08:35 PM

hmm... off the top of my head...

the machine comes in a few pieces.

Base

turntable

2 posts

ratchet system with pillar

weight

4x spacers

2x stoppers

2x nut/knob

----

you screw the ratchet system on the base using an allen key provided.

then u remove the rubber stopper from the arm and slide in the weight with the knob nearer the ratchet system.

slide the turntable into the base

slide the posts with the arms outwards into the turn table and tighten with the allen key provided

choose a height of spacer that fits your racquet and drop them on the screw on the posts.

drop the stoppers on the screw

then turn the nut down.

that's about it i guess....

TheShaun · 08-19-2008, 09:01 PM

it will take you 5 minutes to put it together. it's almost all in pieces. it comes in a long narrow box. don't worry about it.

Gamma Tech · 08-20-2008, 04:46 AM

you can download a copy of the manual @ www.gammasports.com to get an idea also.
bret

08-19-2008, 08:22 PM	#1
NadalFan1990 Guest Posts: n/a	Assembly needed for Gamma X-2 the title is self-explanatory, but here's the gist: I am wondering how much of the machine is already put together and how much I have to put together...

08-19-2008, 08:35 PM	#2
almerickso Rookie Join Date: Aug 2007 Location: Singapore/Philippines Posts: 368	hmm... off the top of my head... the machine comes in a few pieces. Base turntable 2 posts ratchet system with pillar weight 4x spacers 2x stoppers 2x nut/knob ---- you screw the ratchet system on the base using an allen key provided. then u remove the rubber stopper from the arm and slide in the weight with the knob nearer the ratchet system. slide the turntable into the base slide the posts with the arms outwards into the turn table and tighten with the allen key provided choose a height of spacer that fits your racquet and drop them on the screw on the posts. drop the stoppers on the screw then turn the nut down. that's about it i guess.... __________________ Head Microgel Extreme Pro Supex Big Ace 1.17 / Gosen Sheep Micro 17

08-19-2008, 09:01 PM	#3
TheShaun Hall Of Fame Join Date: Jun 2007 Location: [K]ANADA Posts: 2,107	it will take you 5 minutes to put it together. it's almost all in pieces. it comes in a long narrow box. don't worry about it. __________________ You have finished reading my post, and are now reading my signature.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode