• Twitter
  • Facebook
  • Blog
  • Blogs
  • FAQ

Go Back   Talk Tennis > Tennis Equipment > Strings
Reload this Page Tension differentials between mains and crosses - which produces most spin?
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Page 1 of 2 1 2 >
 
Thread Tools Display Modes
Old 11-17-2012, 08:40 AM   #1
Torres
Hall Of Fame
 
Torres's Avatar
 
Join Date: Jan 2011
Posts: 3,643
Question Tension differentials between mains and crosses - which produces most spin?

If I have a poly and string up a racquet at say 53/52, will that produce more spin than say, the same racquet strung at 52/53?

If so, why?

(the actual tension is obviously for illustration, so it could be 52/54, 54/52 etc)

Last edited by Torres : 11-17-2012 at 01:23 PM. Reason: I'm actually after less spin than more spin but I don't think its relevant. Just curious about effect of M/C differentials.
Torres is offline   Reply With Quote
Torres
View Public Profile
Find More Posts by Torres
Old 11-17-2012, 09:13 AM   #2
Dragan
New User
 
Dragan's Avatar
 
Join Date: Nov 2012
Location: Belgrade, Serbia
Posts: 84
Default

Purely hypothetical guess would be that lower tension in mains should produce marginally better spin, everything else being the same, due to more pronounced mains snap-back effect.

However, in such a close tension ranges (only 2% difference between two setups) I don't believe anybody could tell what is better in a blind test.
Dragan is offline   Reply With Quote
Dragan
View Public Profile
Find More Posts by Dragan
Old 11-17-2012, 09:20 AM   #3
pvaudio
Legend
 
Join Date: Jul 2009
Posts: 7,468
Default

I would imagine the same as Dragan. Nonetheless, I don't think you'd notice it.
pvaudio is offline   Reply With Quote
pvaudio
View Public Profile
Find More Posts by pvaudio
Old 11-17-2012, 11:07 AM   #4
Muppet
Professional
 
Join Date: Nov 2011
Location: Boston
Posts: 889
Default

Just for theory's sake, I'd think that looser crosses would allow the mains to move and snap back more easily than putting the slack on the mains. On the other racquet, tighter crosses would make the mains deflect more deeply in the weave. Wouldn't this jam the mains up more and get in the way of their movement?
__________________
sharp < > lucid

Last edited by Muppet : 11-17-2012 at 11:12 AM.
Muppet is offline   Reply With Quote
Muppet
View Public Profile
Find More Posts by Muppet
Old 11-17-2012, 11:59 AM   #5
Torres
Hall Of Fame
 
Torres's Avatar
 
Join Date: Jan 2011
Posts: 3,643
Default

Quote:
Originally Posted by Muppet View Post
Just for theory's sake, I'd think that looser crosses would allow the mains to move and snap back more easily than putting the slack on the mains. On the other racquet, tighter crosses would make the mains deflect more deeply in the weave. Wouldn't this jam the mains up more and get in the way of their movement?
That's what I would have thought ie tighter crosses = less spin, but its not something I've tried very much (have always strung at the same tension M/C for the same string), so its not something I'm sure about at all.

I throw the question out there in the hope of futher responses or insight......
Torres is offline   Reply With Quote
Torres
View Public Profile
Find More Posts by Torres
Old 11-17-2012, 12:57 PM   #6
anubis
Semi-Pro
 
Join Date: Mar 2012
Posts: 798
Default

Its the mains that produce the most spin in your racquet, so stringing the mains lower will produce more spin.

But on the flip side, you also have to loosen your crosses too. Correct me if i'm wrong, but when the crosses are tighter than the mains, that will raise the overall reference tension... sort of undo-ing your efforts in loosening your mains.

If you're stringing at 53/52, then bring both down at least two lbs, if not more, together, in order to increase spin.

And, perhaps string a smaller gauge too. The thinner the string, the more spin.
anubis is offline   Reply With Quote
anubis
View Public Profile
Find More Posts by anubis
Old 11-17-2012, 04:57 PM   #7
UCSF2012
Professional
 
Join Date: Mar 2010
Posts: 1,491
Default

Do an experiment and come tell us.
UCSF2012 is offline   Reply With Quote
UCSF2012
View Public Profile
Find More Posts by UCSF2012
Old 11-17-2012, 10:50 PM   #8
Torres
Hall Of Fame
 
Torres's Avatar
 
Join Date: Jan 2011
Posts: 3,643
Default

Quote:
Originally Posted by UCSF2012 View Post
Do an experiment and come tell us.
You do realise that you still haven't explained your previous suggestion about how you can string a racquet without having to cut it from the reel, that it wasn't necessary to measure string lengths etc.

I'm still waiting for your explanation.
Torres is offline   Reply With Quote
Torres
View Public Profile
Find More Posts by Torres
Old 11-17-2012, 10:53 PM   #9
UCSF2012
Professional
 
Join Date: Mar 2010
Posts: 1,491
Default

Quote:
Originally Posted by Torres View Post
You do realise that you still haven't explained your previous suggestion about how you can string a racquet without having to cut it from the reel, that it wasn't necessary to measure string lengths etc.

I'm still waiting for your explanation.
You're going to wait for a while, because I don't even know what you're talking about.
UCSF2012 is offline   Reply With Quote
UCSF2012
View Public Profile
Find More Posts by UCSF2012
Old 11-18-2012, 12:45 AM   #10
Torres
Hall Of Fame
 
Torres's Avatar
 
Join Date: Jan 2011
Posts: 3,643
Default

Quote:
Originally Posted by UCSF2012 View Post
You're going to wait for a while, because I don't even know what you're talking about.
Quote:
Originally Posted by UCSF2012 View Post
Pull out 11.5m from a reel, DO NOT cut it out, mark the 11.5m point with tape, string it up, and see how much string is leftover or how much more needed. Calculate how much string it took. Done.
I wait in anticipation!
Torres is offline   Reply With Quote
Torres
View Public Profile
Find More Posts by Torres
Old 11-18-2012, 09:42 AM   #11
brucie
Professional
 
Join Date: Feb 2006
Posts: 1,316
Default

Quote:
Originally Posted by Dragan View Post
Purely hypothetical guess would be that lower tension in mains should produce marginally better spin, everything else being the same, due to more pronounced mains snap-back effect.

However, in such a close tension ranges (only 2% difference between two setups) I don't believe anybody could tell what is better in a blind test.
Agree in theory... Mains generate the spin on groundies at least...
__________________
Head Youtek Speed MP/ IG Speed MP, 16x19, 335g strung, SPPP Strings 53-62lbs
Babolat Leather, Gamma Lead, Tourna Over-wrap
brucie is offline   Reply With Quote
brucie
View Public Profile
Find More Posts by brucie
Old 11-18-2012, 04:19 PM   #12
TimothyO
Hall Of Fame
 
Join Date: Oct 2010
Location: Baseline
Posts: 2,227
Default

It depends on the strings and frame in question.

Let's assume a softer main (gut or a soft multi) and a stiffer cross (poly or a stiff multi or synth gut). Generally with this setup you'd want a lower tension cross and higher tension main to balance the two. You probably wouldn't want to string the mains looser in this case.

Reverse the above and you might want to string the stiff mains looser and the soft crosses tighter or the same since the natural differences in stiffness might balance the two.

In the two cases above you don't have much of a choice and spin will be determined by other factors.

Assuming a homogeneous setup you generally want the longer mains strung a little bit tighter than the shorter crosses to even out stringbed stiffness. The idea is that the longer mains naturally flex more than the shorter crosses and in the interest of producing a reliable SB you might want to balance the relative performance.

So again, there's not much of a choice in some ways.

The problem is that not paying attention to string choice and pattern first can result in a wonky stringbed. For example, string natural gut mains at 48 and super stiff poly crosses at 52 in a very open pattern and you'll probably have some control issues. Spin will be the last of your worries.

To maximize spin potential start with your choice of mains and crosses, pay attention to string friction and ball friction, and then base relative tension on string choice and density (more open string closer together, more dense you can increase the difference). Worrying about spin potential and relative tension before considering string choice and pattern is putting the cart before the horse.

Finally, the mains do contribute most to spin but the must be just right, not too soft (won't snap back fast to flick the ball and cause spin) and not too stiff (fail to move enough). I've experienced both using the same strings. For every string choice and frame there's a Goldilocks Tension for spin, power, and control.
__________________
L27" | 95" | 16x19 | Flex 57 | 336g | 8 HL | SW 320
VS Longevity / IsoSpeed Black Fire 17 @ 56 / 50

Last edited by TimothyO : 11-18-2012 at 04:27 PM.
TimothyO is offline   Reply With Quote
TimothyO
View Public Profile
Find More Posts by TimothyO
Old 11-18-2012, 08:13 PM   #13
UCSF2012
Professional
 
Join Date: Mar 2010
Posts: 1,491
Default

Quote:
Originally Posted by Torres View Post
I wait in anticipation!
You made this much fuss about a miscalculation? Stupid old man.
UCSF2012 is offline   Reply With Quote
UCSF2012
View Public Profile
Find More Posts by UCSF2012
Old 11-18-2012, 09:07 PM   #14
fortun8son
Hall Of Fame
 
fortun8son's Avatar
 
Join Date: Apr 2011
Location: The Desert
Posts: 2,996
Default

Quote:
Originally Posted by UCSF2012 View Post
You made this much fuss about a miscalculation? Stupid old man.
Others were wondering, too. Cocky, know-it-all, young whippersnapper.
__________________
Neos 1000, Eagnas Combo 810(home),Prince 5000(work)
Member USRSA
fortun8son is offline   Reply With Quote
fortun8son
View Public Profile
Find More Posts by fortun8son
Old 11-18-2012, 11:37 PM   #15
Torres
Hall Of Fame
 
Torres's Avatar
 
Join Date: Jan 2011
Posts: 3,643
Default

Quote:
Originally Posted by UCSF2012 View Post
You made this much fuss about a miscalculation?
What I'm highlighting - and I've seen this in numerous posts of yours - is that you act all cocky and glib, like a know it all, but in reality you don't have any clue whatsoever about the subject matter that you comment on, whether it's strings, racquets, technique etc

Your post about how it's possible to string a racquet without cutting the string from the reel is a very obvious example of your stupidity.

You try and make out that you know more than you actually do but in short, you're a fake. A whopper. And a big one at that.

Last edited by Torres : 11-18-2012 at 11:46 PM.
Torres is offline   Reply With Quote
Torres
View Public Profile
Find More Posts by Torres
Old 11-19-2012, 01:46 AM   #16
COPEY
Professional
 
COPEY's Avatar
 
Join Date: Nov 2008
Posts: 1,397
Default

Hey Torres, don't sugar-coat it; tell him what you really think lol. I see posts in here sometimes that make me shake my head, but some of UCSF's do kind of...well, standout.
__________________
Need help finding lost dog: walks with a limp, recently castrated, can only see out of one eye - answers to the name, "Lucky".

Last edited by COPEY : 11-19-2012 at 01:48 AM.
COPEY is offline   Reply With Quote
COPEY
View Public Profile
Find More Posts by COPEY
Old 11-19-2012, 04:52 AM   #17
UCSF2012
Professional
 
Join Date: Mar 2010
Posts: 1,491
Default

Quote:
Originally Posted by Torres View Post
What I'm highlighting - and I've seen this in numerous posts of yours - is that you act all cocky and glib, like a know it all, but in reality you don't have any clue whatsoever about the subject matter that you comment on, whether it's strings, racquets, technique etc

Your post about how it's possible to string a racquet without cutting the string from the reel is a very obvious example of your stupidity.

You try and make out that you know more than you actually do but in short, you're a fake. A whopper. And a big one at that.
You should be old enough to know one thing in life: you pick your battles. You don't make the biggest fuss over rushed typing.... "OMG, he must be the stupidest man on earth. He said C before B! Ah. So wrong and so arrogant!!!!"

And of course, in all this, you miss the big picture: If you want to know how much string to use, you measure how much it took and account for it next time. That was the main idea of that paragraph, but you're obsessed about errors from rushed typing. You must have been too cool for school thirty/forty years ago.

I'll get an editor one of these days to monitor my blog posts. It obviously matters for you old farts. He'll do the thinking for you so you don't have to.

Last edited by UCSF2012 : 11-19-2012 at 05:02 AM.
UCSF2012 is offline   Reply With Quote
UCSF2012
View Public Profile
Find More Posts by UCSF2012
Old 11-19-2012, 05:01 AM   #18
UCSF2012
Professional
 
Join Date: Mar 2010
Posts: 1,491
Default

SAT skills don't go away just because you've graduated from high school. ...what's the author's main point in lines 18 through 24? You're not reading A Tale of Two Cities. It's an internet blog. You got caught up in word choice, allusions, symbolism and the works.
UCSF2012 is offline   Reply With Quote
UCSF2012
View Public Profile
Find More Posts by UCSF2012
Old 11-19-2012, 05:03 AM   #19
Bartelby
Legend
 
Bartelby's Avatar
 
Join Date: Nov 2005
Posts: 6,543
Default

Torres is like that so just ignore him.

I made an innocent comment once on the aesthetics of a racquet and he poured scorn on my preciousness.

I then found a thread where he gushed about the beautiful blueness of his racquet and his string, etc.

I wrote a barbed remark about this apparent inconsistency and he had it removed.
__________________
Every government has its secret service branch ... A messy job? Well that's when they usually call on me ... Oh yes, my name is Drake, John Drake.
Bartelby is offline   Reply With Quote
Bartelby
View Public Profile
Find More Posts by Bartelby
Old 11-19-2012, 05:20 AM   #20
arche3
Hall Of Fame
 
arche3's Avatar
 
Join Date: Aug 2009
Posts: 2,630
Default

Quote:
Originally Posted by Bartelby View Post
Torres is like that so just ignore him.

I made an innocent comment once on the aesthetics of a racquet and he poured scorn on my preciousness.

I then found a thread where he gushed about the beautiful blueness of his racquet and his string, etc.

I wrote a barbed remark about this apparent inconsistency and he had it removed.
Dats tournes fir ya. All bhbr no substance.
__________________
Babolat AeroProDrive GT. (x3) Babolat VS blk gut 16/Lux 4G 16 (55/52)
350 grams, 8 points HL, 336 SW
arche3 is offline   Reply With Quote
arche3
View Public Profile
Find More Posts by arche3
Reply
Page 1 of 2 1 2 >

« Previous Thread | Next Thread »


Go Back   Talk Tennis > Tennis Equipment > Strings
Reload this Page Tension differentials between mains and crosses - which produces most spin?

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode
Hybrid Mode Switch to Hybrid Mode
Threaded Mode Switch to Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:08 PM.

Talk Tennis :: Powered By Tennis Warehouse - Archive - Top

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
© 2006 - Tennis Warehouse