
Register  FAQ  Members List  Calendar  Search  Today's Posts  Mark Forums Read 

Thread Tools  Display Modes 
09132012, 05:13 AM  #1 
Rookie
Join Date: Apr 2010
Location: Stockholm, Sweden
Posts: 243

A tip for better accuracy when measuring swingweight
The TWU way of measuring the swingweight by measuring the swing time of the racquet is a convenient and accurate method, provided that you get the data right. However, there is a small modification you can make to improve the TWU setup.
There are two lengths and the swing time that has to be measured. All three enter the equation squared, so care is needed. To measure the swing time accurately an app like swingTool comes in handy. The lenghts has to be measured with a ruler. In the TWU procedure it is recommended that you hang the the racquet from the top strings. But as I will show a lower point is probably better. You can hang it at any point you like, this is both theoretically sound and works in practice, as was shown in this thread. (It is actually the reason why hanging it from the strings works to begin with). If you take the equation that calculate the swing weight from the swing time, keep the time constant and plot it for different hanging points you get a curve like this (the distance is measured from the balance point): What is interesting is that the curve has a peak around 23 cm above the balance point and that the peak is rather flat. This means that around this peak the swing weight value changes very little when you change the distance. This in its turn means that an error when measuring the distance to the hang point will influence the resulting swing weight very little! The curve will vary a little for different racquets, but you can generalize it by differentiating the expression that calculates the swing weight. That leads to the following expression: Where h is the distance in m from the balance point, and T is the swing time. So if you have a racquet with a swing time of 1.3 s and a balance of 33 cm, you get h = 0.124*1.3^2 + 0.33 = 0.54 i.e the best place to hang the racquet is 54 cm from the end but. It doesn't mean you have to hit this point exactly, but if you hang it somewhere around there you will minimize the error from measuring the hang point. Then it only remains to find the balance with enough accuracy /Sten __________________________________________________ _________ racquetTune, stringBed and swingTool racquet apps for the iPhone/iPad. Last edited by stoneage : 09132012 at 05:26 AM. 
09132012, 09:03 AM  #2  
Legend
Join Date: Jul 2008
Posts: 5,155

Quote:


09132012, 01:05 PM  #3 
Hall Of Fame
Join Date: May 2010
Location: SF, CA
Posts: 1,779

Or 2224 cm above balance point of racquet. On an XL frame, I think I would prefer 2224 cm above BP rather than 54 cm above butt cap.

09132012, 03:45 PM  #4 
New User
Join Date: Apr 2012
Posts: 83

Sten, this is very interesting. Just tried it out, and hanging the racket 23.5 cm above the balance point and 31.9 cm above the balance point (highest cross) gave me the same swingweight using the SW calculator. At 31.9 cm, adding 0.5 cm to the "distance from handle end to hang string" decreased swingweight by 3 kg*cm^2, while at 23.5 cm, adding 0.5 cm decreased swingweight less than 1 kg*cm^2 (no change registered). On the one hand, it's reassuring that hanging from the highest cross can give you accurate results if you measure distance carefully enough, but thanks for showing that if I use a lower cross, I no longer have to worry about fractions of millimeters!

Circa 1762 
View Public Profile 
Find More Posts by Circa 1762 
09142012, 12:14 AM  #5 
Rookie
Join Date: Apr 2010
Location: Stockholm, Sweden
Posts: 243

The formula had disappeared from the original post, but it is back now.
Sorry for the miss. 
09142012, 09:33 AM  #6 
Hall Of Fame
Join Date: Mar 2006
Posts: 4,270

Bravo. Well done.
__________________
BLX Blade 98. 13.69 oz., 12.55", 369 SW. 16x20 (outer mains skipped) PreStretched Ashaway Kevlar 16g/ZX Monogut Natural 16g, 66/46 lbs 
travlerajm 
View Public Profile 
Find More Posts by travlerajm 
09152012, 08:51 AM  #7 
Rookie
Join Date: Apr 2010
Location: Stockholm, Sweden
Posts: 243

Thanks
You might know this, but if you hang the racquet on a string at twice the balance, i.e. at 2R you can get MgR/I directly from the swing time: MgR/I=4*pi^2/T^2 Two problems though, it obviously only works for head light racquets. And there might not be a string exactly at 2R. But it might serve as a quick approximation. 
01282013, 04:42 AM  #8 
SemiPro
Join Date: Oct 2012
Posts: 696

fantastic tip! thanks stoneage!
__________________
mg radical mp x 7, 344sw/353w,7ptsHL,gut/poly. weekend hacker. 
taurussable 
View Public Profile 
Find More Posts by taurussable 

Thread Tools  
Display Modes  

