clutch question

spectraflamed · 05-10-2008, 08:32 PM

ok dumb question please bear with me. Using a clutch if the weight is below I just turn and hold the clutch drum to get the weight horizontal and move the clamp while still holding the drum? I got my mains done now onto to crosses

dancraig · 05-10-2008, 08:47 PM

http://www.eagnas.com/maxgen/griprach.html#RATCHOP

Ljubicic for number1 · 05-24-2008, 08:24 AM

Dancraig, Could you please drop me a email at forma_in@hotmail.com please. Tried to email you but you have selected not to accept emails through the forum.

You offered me great advice a few years back when I was buying my stringing machine and I would love to run something past you.

Thanks John.

Mansewerz · 05-24-2008, 08:38 AM

Spectra, do you have an sp swing? and did you get it off the bay?

Bud · 05-24-2008, 05:41 PM

Quote:

Originally Posted by spectraflamed

ok dumb question please bear with me. Using a clutch if the weight is below I just turn and hold the clutch drum to get the weight horizontal and move the clamp while still holding the drum? I got my mains done now onto to crosses

No, just hold the tensioning mechanism and lift the weight. You'll hear the clicking... let it click 1-2 times then release the clutch/tensioning mechanism and then release the weight. Don't touch the clamps.

Mansewerz · 05-24-2008, 05:53 PM

Quote:

Originally Posted by Bud

No, just hold the tensioning mechanism and lift the weight. You'll hear the clicking... let it click 1-2 times then release the clutch/tensioning mechanism and then release the weight. Don't touch the clamps.

I think he has the SP swing, so there is no clicking on that clutch.

Bud · 05-24-2008, 10:50 PM

Quote:

Originally Posted by Mansewerz

I think he has the SP swing, so there is no clicking on that clutch.

Oh... then do everything above except listen and count clicks...

Hold the clutch, lift the arm about an inch or so above horizontal, release the clutch then slowly release the drop weight.

05-10-2008, 08:32 PM	#1
spectraflamed New User Join Date: Nov 2006 Posts: 91	clutch question ok dumb question please bear with me. Using a clutch if the weight is below I just turn and hold the clutch drum to get the weight horizontal and move the clamp while still holding the drum? I got my mains done now onto to crosses

05-24-2008, 08:24 AM	#3
Ljubicic for number1 Hall Of Fame Join Date: Dec 2005 Location: Home Of The Socceroos Posts: 2,172	Dancraig, Could you please drop me a email at forma_in@hotmail.com please. Tried to email you but you have selected not to accept emails through the forum. You offered me great advice a few years back when I was buying my stringing machine and I would love to run something past you. Thanks John. __________________ http://www.jelena-dokic.com/

05-24-2008, 08:38 AM	#4
Mansewerz Legend Join Date: Oct 2007 Location: Caught in No Man's Land Posts: 9,168	Spectra, do you have an sp swing? and did you get it off the bay? __________________ Gameplan: Get it deep, wait for the short ball, then come in. (2) Volkl C10 Pros

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode