|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Rookie
Join Date: Mar 2010
Posts: 278
|
So, like the compulsive project person I can be sometimes, I did something without searching through the TT archives first. I have a TX Pro with a 4 1/2 grip and a Graphite Pro with a 4 1/4 grip, so I decided to swap pallets so I could start hitting with the TXP. Thinking all Head hairpins with interchangeable pallets were created equal, I popped them off but soon realized the Graphite Pro hairpin was a bit wider than the TXP - which I would have known had I done a quick search. Subsequently, half of that pallet is in the trash, so now I need a replacement. (And, yes, this is the same racquet I had in the classifieds
|
|
|
|
| Racquet Daddy |
| View Public Profile |
| Find More Posts by Racquet Daddy |
|
|
#2 |
|
Semi-Pro
Join Date: Sep 2004
Posts: 693
|
If you could post the dimensions of the bare pin on that racquet, I can measure inside the Volkl pallets.
|
|
|
|
|
|
#3 |
|
Rookie
Join Date: Mar 2010
Posts: 278
|
I think it was 1 1/8 inches long.
|
|
|
|
| Racquet Daddy |
| View Public Profile |
| Find More Posts by Racquet Daddy |
![]() |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|