|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Professional
Join Date: Mar 2009
Location: the Netherlands
Posts: 851
|
Who can provide me with these stringing patterns:
Wavex 3004 Titanium 110 (Silver/Grey/Black) Wavex 3001 Titanium 95 (Yellow/Silver/Black) I got a few of these nos frames and it's a bit tricky to figure it out. Thanks in advance.....!!
__________________
2x MAX 200G PRO, Nat.Gut/Ferry Force Super Touch at 58 lbs. |
|
|
|
|
|
#2 |
|
Professional
Join Date: May 2010
Location: SF, CA
Posts: 1,334
|
Two comments. Have you tried contacting Wavex at wavexint.com? They're still around. Their site, however, shows both frames to be 95's, so I am not sure what to say about your frame sizes. Have you also tried the old SP site?
http://web.archive.org/web/200903120.../patterns.html They do show some wavex instructions, though I am not sure if they're for 110 or 95. |
|
|
|
|
|
#3 |
|
Hall Of Fame
Join Date: Jul 2009
Location: Laker Land
Posts: 3,638
|
I found my USRSA Stringers Digest:
Wavex 3004: 1 Piece (37'/SS 9') or 2 Piece (M 19' + C 18') 55-65 Lbs 16x19 pattern Start Mains at T Mains skip 8T&8H Mains Tie Off 6T 1 PC Crosses Start 8T End 8H Crosses Tie off 5H Wavex 3001: 1 Piece (36'/SS 8'6") only 50-60 Lbs 16x19 pattern Start Mains at T Mains skip 7T,9T & 7H, 9H Mains Tie Off 8T 1 PC Crosses Start 7T End 7H Crosses Tie off 5H
__________________
Machines: Gamma 6004 2-point w/ Wise 2086 & Babolat Sensor Dual |
|
|
|
| Lakers4Life |
| View Public Profile |
| Find More Posts by Lakers4Life |
![]() |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|