Should I string this racket

kenshireen · 08-03-2012, 02:29 PM

My friend gave me a Prince 03 Silver...a big mother... on think it's 118 or 115.
I have a bab star 2.. od machine for the 80's.
I can set the racket on the machine except that the two thumb screws on top are at 11 and 1 since I cannot move them down any lower.

Is it ok to string.... will this be enough support

Irvin · 08-03-2012, 03:04 PM

I think it would be ok to string. Think about how many times people string rackets on two point machines.

EDIT: try making sure the 12 o'clock support is as far out (extended toward the center of the racket) as you can get it that may give you more room. I am talking about the piece that touches the inside of the racket and not the tower.

08-03-2012, 02:29 PM	#1
kenshireen Professional Join Date: Aug 2004 Posts: 1,030	Should I string this racket My friend gave me a Prince 03 Silver...a big mother... on think it's 118 or 115. I have a bab star 2.. od machine for the 80's. I can set the racket on the machine except that the two thumb screws on top are at 11 and 1 since I cannot move them down any lower. Is it ok to string.... will this be enough support

08-03-2012, 03:04 PM	#2
Irvin Legend Join Date: Mar 2007 Location: Marietta, Ga Posts: 7,052	I think it would be ok to string. Think about how many times people string rackets on two point machines. EDIT: try making sure the 12 o'clock support is as far out (extended toward the center of the racket) as you can get it that may give you more room. I am talking about the piece that touches the inside of the racket and not the tower. __________________ Irvin - I wish Facebook would notify me when people delete me so I can 'Like it' Last edited by Irvin : 08-03-2012 at 03:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode