Dunlop M-Fil 200 4 1/2 (L4)

aggietex08 · 01-21-2013, 03:03 PM

I have a Dunlop M-Fil 200 in L4 (4 1/2) grip size. I would rate the racquet condition a 8/10. The only thing keeping it from a 9/10 is the original grip is in poor shape and a few tiny paint chips that have been touched up. If you use an overgrip the original grip is not an issue. As a reference point I am picky. See pictures below or email for more. The racquet is currently unstrung so I will throw in a set of strings with the racquet!

I have weighted and taken the balance of the racquet both strung, overgrip and dampener and without any of those.

Strung specs: 349.5g / 32cm hl

Unstrung specs: 326.4g / 31.25cm hl

Racquets is priced at $50 shippped.

Pictures of the Dunlop M-Fil 200 can be seen below
http://www.flickr.com//photos/codyjb...77907495/show/

Have references under aggietex08

Email to: aggietex08 @ yahoo . com (remove the spaces)

01-21-2013, 03:03 PM	#1
aggietex08 Rookie Join Date: Mar 2010 Location: Montgomery, Texas Posts: 294	Dunlop M-Fil 200 4 1/2 (L4) I have a Dunlop M-Fil 200 in L4 (4 1/2) grip size. I would rate the racquet condition a 8/10. The only thing keeping it from a 9/10 is the original grip is in poor shape and a few tiny paint chips that have been touched up. If you use an overgrip the original grip is not an issue. As a reference point I am picky. See pictures below or email for more. The racquet is currently unstrung so I will throw in a set of strings with the racquet! I have weighted and taken the balance of the racquet both strung, overgrip and dampener and without any of those. Strung specs: 349.5g / 32cm hl Unstrung specs: 326.4g / 31.25cm hl Racquets is priced at $50 shippped. Pictures of the Dunlop M-Fil 200 can be seen below http://www.flickr.com//photos/codyjb...77907495/show/ Have references under aggietex08 Email to: aggietex08 @ yahoo . com (remove the spaces)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode