Eagnas clamp bases wont lock in place

austintennis2005 · 01-08-2013, 06:14 PM

i have an Eagnas tabletop electric machine and the clamp bases wont lock into place...do i need to replace them or is there a way to fix them?

thanks!

Lakers4Life · 01-08-2013, 06:18 PM

What model? Eagnas makes two kinds, Screw type or Swtich action.

mmk · 01-09-2013, 02:10 AM

Depending on the type of clamp base you have, check out this thread:

http://tt.tennis-warehouse.com/showthread.php?t=336229

I did the mods from that thread, and they really helped.

tbuggle · 01-09-2013, 04:36 AM

They can be adjusted (unless stripped or somesuch). Just depends on which clamp bases, as to how you do it.

Lakers4Life · 01-09-2013, 04:34 PM

I'm assuming he's got a switch lever action base clamp. That seems to be a common problem with Eagnas more than the ConeLock (Eagnas name). In either case, the OP has not responded so, I'm calling this a dead thread until he replies.

01-08-2013, 06:14 PM	#1
austintennis2005 Rookie Join Date: Oct 2005 Posts: 268	Eagnas clamp bases wont lock in place i have an Eagnas tabletop electric machine and the clamp bases wont lock into place...do i need to replace them or is there a way to fix them? thanks! __________________ Jock: "Well, if I did give you power,bobby ewing you got nothing......NOBODY GIVES YOU POWER, REAL POWER IS SOMETHING YOU TAKE!!!!!!!"

01-08-2013, 06:18 PM	#2
Lakers4Life Hall Of Fame Join Date: Jul 2009 Location: Laker Land Posts: 3,638	What model? Eagnas makes two kinds, Screw type or Swtich action. __________________ Machines: Gamma 6004 2-point w/ Wise 2086 & Babolat Sensor Dual Last edited by Lakers4Life : 01-08-2013 at 06:29 PM.

01-09-2013, 04:36 AM	#4
tbuggle Hall Of Fame Join Date: Mar 2010 Location: Western North Carolina Posts: 1,882	They can be adjusted (unless stripped or somesuch). Just depends on which clamp bases, as to how you do it. __________________ I got some rackets, and I got a stringer.

01-09-2013, 04:34 PM	#5
Lakers4Life Hall Of Fame Join Date: Jul 2009 Location: Laker Land Posts: 3,638	I'm assuming he's got a switch lever action base clamp. That seems to be a common problem with Eagnas more than the ConeLock (Eagnas name). In either case, the OP has not responded so, I'm calling this a dead thread until he replies. __________________ Machines: Gamma 6004 2-point w/ Wise 2086 & Babolat Sensor Dual

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode