|Yesterday, 03:07 AM||#1|
Join Date: Mar 2013
Advice on poly poly cross
I have organix 8 racquets which I love - great balance/feel and compromise between power and control.
Was using those with two different set ups:
- Volkl Cyclone at around 50
- Yonex PTP 1.25 at around 48
Cyclone gives a reasonable control, good spin - but no power.
PTP gives plenty of power, softer to play - but it is difficult to get much spin and softer shots are difficult to make.
Trying to get some compromise and thinking about poly/poly hybrid.
I have some spare Luxilon Rough ... Thinking to have Rough/PTP hybrid - to achieve spin + power.
Any suggestions on how would you put it?
Rough on mains?
What would be a good tension.
I was thinking initially
luxilon rought - mains 48
PTP - crosses 46
Somebody suggested to me that would be better to have rough at crosses.
|Yesterday, 01:28 PM||#3|
Join Date: Sep 2004
Location: O-H-I-O Land of The Ohio State Buckeyes
I would suggest using the rough/textured string in the mains for added spin and using equal tension or slightly lower tension in the mains. That should allow them to slide more freely and generate more spin.
Wilson Six.One 95