Search results

  1. L

    Angel TC 100, RA 63, 310g

    Hi are you still looking. i have one in v3 paint, almost any gripsize.. Best lphansen, larspaulihansen at yahoo dot dk
  2. L

    unpopular opinion: Head's RECTANGULAR grip ****ty on forehands

    Years ago I could not use anything than Head tk76 rectangular shape. And my preferred size was 4 (41/2). Nowadays I find myself liking the more square Prince shape much better and I am sizing down to 2 or 3.. For me I think that it has to do with a more modern tecnique, needing more RHS. For...
  3. L

    Racquet lifespan?

    I remember having read about Yonex and Marcello Rios. They followed one particular racket during a hole year, with lots of use and restrings. Apperently it became 10% flexier.. My two cents
  4. L

    Looking for new racquet. Current racquet - Fischer pro tour ft

    Remember that your Fischer racquet is 27.25 inch, so something similar lenghtwise?
  5. L

    unusual Carlos Moya racket

    No Its Babolat ballistic polymono Moya used to use that..
  6. L

    The Official Angell Users Club

    Hi I have changed pallets many times. I am using cheap , thin double sided carpettape and a clean hairpin. For the buttcap I am using 4 stapels that are 7-8 mm and a normal springpowered stapler. Put the stables through the thinnest of the buttcap.. I have never had a Angell/Vantage...
  7. L

    WANTED - Bumper/Grommets Slazenger Pro Braided 95 (Henman) 16/18

    Hi You can use pro staff 95 grommets instead.. Lphansen
  8. L

    Prince hairpin shape - foreign pallet?

    Thanks very much, super good and fast info.. What kind of Prince rackets did you do it on? Lphansen
  9. L

    Prince hairpin shape - foreign pallet?

    Hi All Ii I were to remove molded material from the handle of a Prince precision racket, what kind of shape would the hairpin have? I mean if the material are removed , would it be possible to install a pallet from Head or other brand? Simply put, can a pallet be installed on a Prince hairpin...
  10. L

    Prince Precision Graphite II 730 grommets

    Hi I am looking for grommets/bumperguards for my Prince Precision Graphite II 730 rackets. Please advise if you have some for sale/trade... Best lphansen larspaulihansen at yahoo dot dk
  11. L

    The Official Angell Users Club

    I have been using Vantage/Angell rackets almost from the beginning. I took me a long time to adjust to the feel of the brand. Since the start the production now is much “tighter”, meaning less variation and a wider range of specs available. Lately its possible to order flexible and very...
  12. L

    The Official Angell Users Club

    Hi J I have only input regarding Angell rackets. The tc95 flex 70 has in fact the same headsize as your old Dunlops. I know its called 95 sqin but it fits grommets with tc 97 and asl 2 ( which is 98). Flex 70 is unstrung, with strings its 65, also pretty close to your Dunlpos. And the best...
  13. L

    Onestring shake racket

    Anybody
  14. L

    Onestring shake racket

    Hi Has anyone tried the Onestring Shake racket? It is a bit diffucult to get info.. Best Lphansen
  15. L

    Wanted : Angell asl 3

    Found what I was looking for
  16. L

    Wanted : Angell asl 3

    Hi I am looking for an Angell asl 3, grip 2 or 3.. Good condition or better.. Preferably within the EU.. Let me know what you have? mail to larspaulihansen at yahoo dot dk
  17. L

    The Official Angell Users Club

    Hi Have anybody tried to remove/replace the molded handle of an Angell asl 3 with the custom pallets ? Best Lphansen
  18. L

    The Official Angell Users Club

    They do - its the same mold
  19. L

    The Official Angell Users Club

    Yes they do
  20. L

    The Official Angell Users Club

    I normally do it with bumper attached, just using a sharp knife along the frame. If the bumper is the least used with worn grommets, its very diffucult to get it in or out! The result should look like the Head speed rackets for instance.. Lphansen
  21. L

    The Official Angell Users Club

    You can also trim the sidebumpers; it will remove app. 6 g on a tc 100.. Lphansen
  22. L

    Wanted: Angell TC95 16x19

    Hi I have one i L4 B - shape! Its in good condition, will supply a new set of grommets.. Mail or pm to larspaulihansen at yahoo dot dk Many good references as lphansen.. Best Lars
  23. L

    Babolat Pure Aero / Aero Storm

    Hi I have a pure aero lite with weight in the handle - strung weight 326 g. Grip is 2 and condition is 9/10. Located in Denmark.. You can have it very cheap, its just laying around.. Pics and references available.. Best Lphansen
  24. L

    dead polys

    Polystrings are very good at spinproduction and control but they have very poor qualities regarding tension maintenence. In general 5-10 hour before they go dead.. I change mine after max 5 hours.. Mine two cents Lphansen
  25. L

    Downsizing Grip - Pallet Change services

    Why not just change them yourself?
  26. L

    The Official Angell Users Club

    Thanks my friend Joohan is likewise a pleasure to make deals with I am in the process of changing from tc100 ra 70 to tc95/97. I thought I needed a rackets that was more nimble and fast than the tc 100. So far the change is going great... Best lphansen
  27. L

    WTB: Vantage or Angell or Volkl Pallets

    Hi yes I do. What do you need? Lphansen
  28. L

    The Official Angell Users Club

    A bit off the current subject: Can I use same grommets for tc97 (16 x 19) and tc 95 (16x19)? Thanks lphansen
  29. L

    Pros with most / least switch of racket brand in his career?

    Dominick Hrbaty used a Fischer 90 sqin his entire career
  30. L

    The Official Angell Users Club

    Yes to both questions Lphansen
Top