Search results

  1. L

    Pro Staff 100 v13? Discuss here!

    Are these measurements made with strings, plastic and card?
  2. L

    The Official Angell Users Club

    Long time ago during the Vantage years, Paul Angell also made squash rackets....
  3. L

    Angell TC 105 Purchase

    It plays like a more powerfull TC100 ra 70. I have not used the 101, but understand that it flexes like the tc97 in the hoop. The 105 has uniform flex along the entire lenght, so a different feeling.. Hope that helps, Best lphansen
  4. L

    Help from the Angell Crew

    You CAN get rid of weight in the hoop by trimming the sidebumpers. They have no real function anyway.... You would loose 4-5 g and lots of SW... lphansen
  5. L

    unpopular opinion: Head's RECTANGULAR grip ****ty on forehands

    Years ago I could not use anything than Head tk76 rectangular shape. And my preferred size was 4 (41/2). Nowadays I find myself liking the more square Prince shape much better and I am sizing down to 2 or 3.. For me I think that it has to do with a more modern tecnique, needing more RHS. For...
  6. L

    Racquet lifespan?

    I remember having read about Yonex and Marcello Rios. They followed one particular racket during a hole year, with lots of use and restrings. Apperently it became 10% flexier.. My two cents
  7. L

    Looking for new racquet. Current racquet - Fischer pro tour ft

    Remember that your Fischer racquet is 27.25 inch, so something similar lenghtwise?
  8. L

    unusual Carlos Moya racket

    No Its Babolat ballistic polymono Moya used to use that..
  9. L

    The Official Angell Users Club

    Hi I have changed pallets many times. I am using cheap , thin double sided carpettape and a clean hairpin. For the buttcap I am using 4 stapels that are 7-8 mm and a normal springpowered stapler. Put the stables through the thinnest of the buttcap.. I have never had a Angell/Vantage...
  10. L

    Prince hairpin shape - foreign pallet?

    Thanks very much, super good and fast info.. What kind of Prince rackets did you do it on? Lphansen
  11. L

    Prince hairpin shape - foreign pallet?

    Hi All Ii I were to remove molded material from the handle of a Prince precision racket, what kind of shape would the hairpin have? I mean if the material are removed , would it be possible to install a pallet from Head or other brand? Simply put, can a pallet be installed on a Prince hairpin...
  12. L

    The Official Angell Users Club

    I have been using Vantage/Angell rackets almost from the beginning. I took me a long time to adjust to the feel of the brand. Since the start the production now is much “tighter”, meaning less variation and a wider range of specs available. Lately its possible to order flexible and very...
  13. L

    The Official Angell Users Club

    Hi J I have only input regarding Angell rackets. The tc95 flex 70 has in fact the same headsize as your old Dunlops. I know its called 95 sqin but it fits grommets with tc 97 and asl 2 ( which is 98). Flex 70 is unstrung, with strings its 65, also pretty close to your Dunlpos. And the best...
  14. L

    Onestring shake racket

  15. L

    Onestring shake racket

    Hi Has anyone tried the Onestring Shake racket? It is a bit diffucult to get info.. Best Lphansen
  16. L

    The Official Angell Users Club

    Hi Have anybody tried to remove/replace the molded handle of an Angell asl 3 with the custom pallets ? Best Lphansen
  17. L

    The Official Angell Users Club

    They do - its the same mold
  18. L

    The Official Angell Users Club

    Yes they do
  19. L

    The Official Angell Users Club

    I normally do it with bumper attached, just using a sharp knife along the frame. If the bumper is the least used with worn grommets, its very diffucult to get it in or out! The result should look like the Head speed rackets for instance.. Lphansen
  20. L

    The Official Angell Users Club

    You can also trim the sidebumpers; it will remove app. 6 g on a tc 100.. Lphansen
  21. L

    dead polys

    Polystrings are very good at spinproduction and control but they have very poor qualities regarding tension maintenence. In general 5-10 hour before they go dead.. I change mine after max 5 hours.. Mine two cents Lphansen
  22. L

    Downsizing Grip - Pallet Change services

    Why not just change them yourself?
  23. L

    The Official Angell Users Club

    Thanks my friend Joohan is likewise a pleasure to make deals with I am in the process of changing from tc100 ra 70 to tc95/97. I thought I needed a rackets that was more nimble and fast than the tc 100. So far the change is going great... Best lphansen
  24. L

    The Official Angell Users Club

    A bit off the current subject: Can I use same grommets for tc97 (16 x 19) and tc 95 (16x19)? Thanks lphansen
  25. L

    Pros with most / least switch of racket brand in his career?

    Dominick Hrbaty used a Fischer 90 sqin his entire career
  26. L

    The Official Angell Users Club

    Yes to both questions Lphansen
  27. L

    The Official Angell Users Club

    I played them all.. For me the most comfortable was the TC 97 . Thereafter the ra 63 version. I play with the TC 100 ra 70 as my only sticks now.. Lphansen
  28. L

    The Official Angell Users Club

    Hi Why dont you just trim the sidebumpers so that only a slim strip containing the grommets is left ( just like on many Head rackets). I have done this on many Vantage/ Angell rackets. Its shaves ca 4-5 grams off! I can be done bith with or without strings installed.. Regards Lphansen
  29. L

    Nadal added extra lead?

    Hi I have 2 reels of Duralast. Drop me a PM Lphansen
  30. L

    Low stiffness racquets

    I have three bastcore 30 for sale Mail me on larspaulihansen at yahoo dot dk Regards Lphansen