Search results

For what it's worth, TC90 feels a little lighter than PS85 to me. TC90 feels pushed back a little while PS85 penetrates through. But then TC90 is quicker and easier to move to the hitting spot.

It’s a classic topic in the stringing forum. The best answer would be path-finder awls. Many stringers just cut the end sharply and push it in. I use ribbon to pull down over wrapping strings.

It’s a general consensus that low tension does no harm. But you’re already there. There might be something different in your case. I tend to struggle with soft stringbed and develop pain in my arm. Just try higher tension once or twice.

We all know you’ve been through all those. We’re on the same boat more or less. Maybe he bumps up the product and then sells it. There still is a chance.

Well, that’s true. He admits it. Like I said, it was a good news to me. It makes me think of the second device.

It's quite a news. Has anyone tried the line device yet? I have a net device that was sold in the first batch. I believe it's v1.0. My setup will be perfect if I add a net device v2.0 and two line devices. So, anyone? Also, it seems he designed the chip himself. He still is very into this...

I use these carpet scissors. I’ll use them for my life time. http://www.hasegawacutlery.com/canary/902/

Do you have version 1.1? I thought it’s still beta3. Anyway, you’re carrying all the troubles. I just wish you a good luck.

Mine is Smart 909. It’s not much different from other models. The thickness of the rails could be a little unmatched for those bases. I can change rails all together of course while they are one of the concerns, too.

I looked up but I couldn’t find the ring on my machine. Eagnas is a bit simpler than Alpha. You need an Alpha friend.

It’s a pretty good deal. Not that I’m getting it right now but it’s good to know. I use my coarse made Eagnas for a while.

Are you sure? That will fix all the annoyance on my machine.

I guess it’s a normal price for a quality cramp base. But still.

Looks pretty bad. Is it a crank machine? I wish someone who knows can respond to you. I'm sorry but I don't have courage to take my tensioner apart.

I hope both the problems are fixable. Otherwise, the whole machine becomes useless.

Looks cool. But looks expensive, too. I'll be much more interested if the price is around $100.

Hi, Here’s a fellow TC90 user that is very rare on this board. I’m glad to see one. Well, I ordered mine on 5th July, it was shipped on 9th and got home on 11th. It was pretty much one week.

I don’t want to spread my shame, man. No, I’m kidding. I’m pretty sure I did it right. Like Irvin said, it’s impossible.

I’ve put 19 to the RacketTune setting. The reading has to be off a little bit.

Oops. I thought it wrong. I might have woven one extra cross?

Oh, is it true? He might have lost interest then. Is he not giving out the source code? Somebody can take care of it.

It’s a mid against a mid in my case. My prestige mid and TC90 V3 carry almost identical specs. TC90 feels lighter and has less plough through. The prestige has 303 sw unstrung and TC90 is supposed to have 295 sw. To me , sw is a good indication but lightness of hoop matters more. But it’s...

I hope it is actually easier. Anyway, it is a clear instruction to follow. I’ll do it when my mind is full of challenge.

I've never done ATW or am not willing to do it either. It seems tedious. I envy those who can do it casually. I'd switch around 6T and 8T between main and cross if I can't find a way.

I played with my TC90 V3 today. It was super maneuverable thanks to its head light balance. It was especially good on volley and 1HBH. One thing not so good was plough through. It is good but not as good as PS85 that is a plough through monster. Adding some weights here and there may change...

I just got TC90 V3 that is 16x19. I like 2 piece but the space at 11T of this stick is very small. Also, the last cross must go through blocked holes. So I'm thinking of 1 piece now. I thought the cross goes bottom up with 1 piece by looking at the racket. I'm relieved to see it.

I've tried blunt needles but they never worked. PS85 has seriously blocked holes. It'd be a big help if they work. They just don't go in to the holes. If they are small enough to go in, then string doesn't go in to the needle.

Look at my signature. I’ll play with my TC90 V3 for the first time tomorrow. It’s very similar to my Prestige Mid. I won’t compare them side by side but will be able to comment on plow through and stability. ElMagoElGato

93P seems perfect except for the string pattern. I like open pattern better. I can’t change the balance or the pattern, either.

I hope so because I’ll buy it anyway. I had Ficher Vacuum Pro 90 and now have Pacific version that moved balance from 30.5 to 31.5. The thing is, I’m struggling with it. It seems to have a little weight at the tip and it kills me.