Search results

  1. Gamma Tech

    Hi, yes that is possible. If you want to send me an email I can provide you a quote...

    Hi, yes that is possible. If you want to send me an email I can provide you a quote. ewan.malenfant@gammasports.com
    • Gamma Tech
    • Profile post comment
  2. Gamma Tech

    It is, we sell this part as a full assembly. You can email support@gammasports.com for ordering...

    It is, we sell this part as a full assembly. You can email support@gammasports.com for ordering and pricing details.
    • Gamma Tech
    • Profile post comment
  3. Gamma Tech

    Clamps - hard to clean residue

    Cleaning stone is a good option for normal cleaning, but WD40 and sand paper will work the best for solid residue build up like this. Scrub until you see all the dark coloration go away and the texture gets more rough. Once you're done this make sure to remove and access grease and debris with...
  4. Gamma Tech

    Gamma Progression ST II

    Please email or call Gamma, our number and customer support contacts are at gammasports.com. I have these for $3 each.
  5. Gamma Tech

    Gamma Progression ST II

    Looking for replacements at a hardware store is probably your cheapest bet, since i would have to ship them to you. The below commentors are correct that you need a 12mm inner diameter. If you have trouble finding some i do have extras in my parts stock.
  6. Gamma Tech

    Progression II stand compatibility question

    You can find these on our website: https://www.gammasports.com/collections/stringing-machine-accessories/products/upright-stand-castors
  7. Gamma Tech

    The A600 is our highest end mounting system and is only sold individually as a full assembly...

    The A600 is our highest end mounting system and is only sold individually as a full assembly including the turntable, mounts, and clamps and clamp bases.
  8. Gamma Tech

    @joon joon Hello, feel free to send me pictures of the machine and where the bolts go. You can...

    @joon joon Hello, feel free to send me pictures of the machine and where the bolts go. You can use my email ewan.malenfant@gammasports.com. Most likely I can get you the bolts, the plastic pieces I believe I do still have some stock yes. The 7000 uses a different version compared to current models.
  9. Gamma Tech

    Gamma 4000 manual

    Send support@gammasports.com an email and I can get you a pdf copy. @Faraway
  10. Gamma Tech

    Starting clamp?

    No that's not necessary, the material won't wear out. Just gets filled in by string gunk
  11. Gamma Tech

    I probably have what you need, exactly which bolts are you looking for?

    I probably have what you need, exactly which bolts are you looking for?
  12. Gamma Tech

    Starting clamp?

    100% just need to clean any string residue off the gripping surface
  13. Gamma Tech

    I do have that yes, if you send an email to support@gammasports.com we can send it your way...

    I do have that yes, if you send an email to support@gammasports.com we can send it your way. There may be another issue but I think this is a good first step to try.
  14. Gamma Tech

    Have you tried calibrating the machine? You may also want to check the load cell voltage signal...

    Have you tried calibrating the machine? You may also want to check the load cell voltage signal by pressing and holding the large tension adjustment arrows while the machine is powering on.
  15. Gamma Tech

    @pelufo the clamp bases we used for these tables had special bushings that fit the tracks. I...

    @pelufo the clamp bases we used for these tables had special bushings that fit the tracks. I don't have any of those parts anymore unfortunately. Not sure what kind of clamps you're trying to fit, but the busing would need to fit that track pretty well.
  16. Gamma Tech

    Gripper on drop weight scruffing strings

    @abgoosht5 there's lots of good advice in the thread here but keep in mind it could also depend on the type of string you use. With a stiff poly you might not notice any scuffing or imprints but on a very soft multi filament you will often see some small scuff marks or discoloration where...
  17. Gamma Tech

    Not for a machine that old unfortunately no.

    Not for a machine that old unfortunately no.
  18. Gamma Tech

    Gamma Progression ST should mount thumbscrew replacement

    There is a specific style of V mount that fits the 6500 machine that is different from the V mounts we use on current models. I have sold through all my inventory of that style of V mount and they are no longer in production.
  19. Gamma Tech

    Hi, they are those tensioners have the mounting points for the 3 different machines they're used...

    Hi, they are those tensioners have the mounting points for the 3 different machines they're used on. The only difference is that they come with slightly different control panels.
  20. Gamma Tech

    Gamma 6900 ELS vs. Gamma X-ELS

    Those tensioners are interchangeable yes, but the electronics are slightly different.
  21. Gamma Tech

    The new Gamma 6004 w/ 6-Point mounting system

    It would yes.
  22. Gamma Tech

    The new Gamma 6004 w/ 6-Point mounting system

    @Zeustheman You can mount a table fitted with an A600 system to any of our machine accept our drop weights. Brake systems are slightly different but work the same way and are compatible.
  23. Gamma Tech

    Progression II stand compatibility question

    You can reach out to us at support@gammasports.com or 412-323-0335 and we can get one of those out to you.
  24. Gamma Tech

    Progression II stand compatibility question

    There is no compatible floor stand for the Progression 200 either for current or previous models, sorry about that.
  25. Gamma Tech

    Gamma Progression Stringing Machines

    @toaster the Progression II ELS measures 36" in length, 12" at the widest part of the base, 15" at it's widest point overall, and about 15" tall at the highest
  26. Gamma Tech

    To Gamma progression els owners (Tention measure)

    @pantam it sounds like you got a machine with our new software but the old version of the manual, we can get you the updated calibration instructions. Please reach out to support@gammasports.com.
  27. Gamma Tech

    I don't have anything like that available unfortunately, but you can contact...

    I don't have anything like that available unfortunately, but you can contact support@gammasports.com for information on all of our current products.
  28. Gamma Tech

    X-stringer floor stand contact distance

    @tacotanium that is 24 1/4"
  29. Gamma Tech

    Adhesive for clamp friction pad

    @happyandbob I recommend Loctite 330 adhesive along with Loctite Activator 7387 for the best result. Apply the 330 to the clamp and the 7387 to the insert.
  30. Gamma Tech

    Hi there, if the threads are seized it means that something on there is stripped, and because...

    Hi there, if the threads are seized it means that something on there is stripped, and because the 6500 is about a 20 year old machine I no longer have parts to replace those unfortunately. You'll probably be best off with a new stringer.
Top