Search results

  1. pyk64

    Post Your Most Recent Stringing Time

    Total Time: 1 hr & 19 minutes Racquet Strung - 1 Wilson Clash (Prototype) # of Mains/Crosses - 16x19 Pattern Used (1 or 2 piece, ATW) - 2 piece String(s) Used - Ashaway Monogut ZX 58 / Cyberflash 54 Pre-stretch? - No Tension - 58 / 54 lbs Machine Strung On (CP, LO, DW) - Alpha Axis -...
  2. pyk64

    Kyrgios made history? First point won by underhand serve!

    Agree...it's about the same as all junk balls - perfectly fine and drives some people crazy.
  3. pyk64

    AeroPro Drive Junior 26 stringing pattern

    Others have said that you can string 2 piece without enlarging any of the grommets, so will defer to their experience. I had to string a couple of jr racquets recently and while I'm sure they could've been done 2 piece, it wasn't obvious there were sufficient tie off holes. Just take a close...
  4. pyk64

    Oddest, Funniest, or Worst thing you've seen in a USTA match?

    So not at USTA match, but I was playing a USTA doubles practice match with my friend. As I pushed off to return a serve I felt like someone had shot me or clubbed me with a baseball bat on my left calf. After getting situated and trying to stand up, I inquired or my friend, "so what do you...
  5. pyk64

    One Cross String Smiling at Me

    Aargh! I owe the universe a dollar. The last cross is mis-weaved.
  6. pyk64

    One Cross String Smiling at Me

    I'll take a pic and post tonight...curious if it could be a misweave. I would be a whole $1 that it isn't, but I've been wrong,wrong, and badly wrong before. Just ask my wife!
  7. pyk64

    One Cross String Smiling at Me

    Hmmm...that sounds pretty plausible. It didn't happen exactly as you speculated, but I do recall that I had the second to the last cross (the one that is smiling at me) clamped for a while as I fiddled with something else. Wonder if that's the cause, if I should just re-tension?
  8. pyk64

    One Cross String Smiling at Me

    Apologies (and flame suit on) if this has been discussed before. I recently strung my racquet (Head IG Radical Pro) with a full set of SPPP. I'm pretty meticulous about keeping the cross string straight as I pull(crank), but for some odd reason, one of my cross strings came out and smiled at...
  9. pyk64

    Thread on: STRING TRADES

    Hey John. I just have one 17 ga cyclone left. Interested in just one? Still have multiple sets of the 16 ga.
  10. pyk64

    Thread on: STRING TRADES

    I have sets of Volkl Cyclone 16 (umm...pink) and 17 (yellow). Think I have 3 or 4 sets each. Interested in trading for the weiss cannon, SPPP
  11. pyk64

    Thread on: STRING TRADES

    sorry for the delay. email sent today.
  12. pyk64

    Thread on: STRING TRADES

    Have: single sets of Volkl Cyclone 16 ga in pink and 17 ga in yellow. Also have a lot of Gosen OG Micro 17 gauge in natural - reel. Want: Looking to trade for softer/livelier polys in 16 or 17 gauge. Other multi's and Synguts. OG Gosen - white 16 ga
  13. pyk64

    Thread on: STRING TRADES

    I have multiple sets of the Cyclone in 16 and 17 in a lovely yellow and pink (um....but it is dark pink!). I will inventory tonight if interested.
  14. pyk64

    Wanted: Alpha Fixed Clamps

    Anyone have any alpha clamps to sell? Please contact me. Thanks.
  15. pyk64

    Stringing Natural Gut Anxiety!

    Think I'll definitely try some pre-stretch and string 50/50. I learned the hard way on cinching the knot too tightly with a Ashaway Monogut. On the Monogut, pulled too hard too quickly, snapped the string, took out that little abrasive piece on the clamp, and hit myself on the forehead with...
  16. pyk64

    Stringing Natural Gut Anxiety!

    At what point does your anxiety with stringing natural gut go away? I've done a few gut jobs and I still get anxious about clamping too tight/too loose, cleaning everything, twisting, pulling, kinking, kinking, kinking the string. Ugh...does the anxiety ever go away? This weekend I went thru...
  17. pyk64

    Cyberflash and Big Hitter Silver Confusion

    One of the databases I've looked at indicates that the Topspin Cyberflash has a stiffness rating of 240 (1.25) and 258 (1.3) think this was from 2012. However TW in the reviews calls it one of the softest polys they've tested. Also, the same data base lists the following: example a)...
  18. pyk64

    WTB Alpha Fixed Clamps

    WTB used fixed clamps (with the dial adjustment) that will fit on an Alpha stringing machine. Let me know if you have any. Thanks.
  19. pyk64

    FS: (2) Volkl C10 Pros - Yellow/Black

    C10 Pro Interested emailed you.
  20. pyk64

    Volkl Cyclone Thread

    Agree with the V-Star. Gosen Polyquest is pretty soft also. Both are great for my arm, but coming to the conclusion that it's a bit too plush for me at the lower tensions. Will raise the tension from the low 40's to high 40's to see if it feels significantly different.
  21. pyk64

    Tennis Warehouse: Volkl V-Star Playtest

    Second Impression So had two more play sessions from the initial impression above. This string is definitely comfortable for my minor TE, but I would definitely string this up tighter...closer to 50 lbs or maybe even higher. Good spin on ground strokes, but can't quite get the same kick...
  22. pyk64

    Tennis Warehouse: Volkl V-Star Playtest

    Volkl V-Star Review One doubles match and one hitting session so far: Include the following in your review: Gauge received: 17 Color received: Silver/Gray Tension used for playtest: 44 full bed Regular string set up: 40 - 48 depending on string stiffness Racquet brand and model used...
  23. pyk64

    Parts for Alpha Pioneer DC Plus

    Siata94 IS a mensch! Shout out to Siata94! His Alpha Pro base clamps and turntable are now installed on my Alpha Axis - all for just the cost of shipping. Actually I still owe him $.46 :):) Looks like the Pro arm vs the Axis arm has a different mating interface. Anyone know if the Pro...
  24. pyk64

    One more appraisal please!

    A friend of mine that is a professional stringer said they had to string 30+ racquets before their shop would let them string for customers.
  25. pyk64

    Newbie

    Good point. I got a weaker (1.0 strength) pair and it's working well.
  26. pyk64

    Entry Level Stringing Machine - Any recommendations?

    Newbie Stringer... Earlier this spring I purchased a well used Alpha Axis. Constantly fiddling with it, but appreciate the features that it has to offer. If I had to do it again, I'd get another machine with similar features, but would want some type of spring assisted base clamps. Paid $200...
  27. pyk64

    Best items you found at thrift stores (Goodwill)?

    Best Deal Ever! Prince Original Graphite OS in pristine condition. Can't recall offhand, but think it's either circa 1981 or 1986 for $1.99 I still play with it and it comes in at 12.9 oz!
  28. pyk64

    Newbie

    Newbie Stringer too! Just started stringing this summer because I got tired of my wifey breaking her strings so frequently and paying the ~ $30+ each time. Managed to find a very well used Alpha Axis (which needs a lot of upkeep!) and have strung about 20+ racquets so far...about 10 of those...
  29. pyk64

    Parts for Alpha Pioneer DC Plus

    Siata94. Responded to your email. Thanks!
  30. pyk64

    Alpha Axis Parts

    Anyone have any spare parts for Alpha Axis? Looking for: - Fixed Clamps - Base Clamps (including any spare parts of the assembly) Thanks.
Top