Search results

  1. ElMagoElGato

    The Official Angell Users Club

    It’s a classic topic in the stringing forum. The best answer would be path-finder awls. Many stringers just cut the end sharply and push it in. I use ribbon to pull down over wrapping strings.
  2. ElMagoElGato

    Consequences of stringing outside of recommended tension range?

    It’s a general consensus that low tension does no harm. But you’re already there. There might be something different in your case. I tend to struggle with soft stringbed and develop pain in my arm. Just try higher tension once or twice.
  3. ElMagoElGato

    In/Out Device

    We all know you’ve been through all those. We’re on the same boat more or less. Maybe he bumps up the product and then sells it. There still is a chance.
  4. ElMagoElGato

    In/Out Device

    Well, that’s true. He admits it. Like I said, it was a good news to me. It makes me think of the second device.
  5. ElMagoElGato

    In/Out Device

    It's quite a news. Has anyone tried the line device yet? I have a net device that was sold in the first batch. I believe it's v1.0. My setup will be perfect if I add a net device v2.0 and two line devices. So, anyone? Also, it seems he designed the chip himself. He still is very into this...
  6. ElMagoElGato

    String bed Cutters

    I use these carpet scissors. I’ll use them for my life time. http://www.hasegawacutlery.com/canary/902/
  7. ElMagoElGato

    In/Out Device

    Do you have version 1.1? I thought it’s still beta3. Anyway, you’re carrying all the troubles. I just wish you a good luck.
  8. ElMagoElGato

    Xpider Down Pressed Clamp Base

    Mine is Smart 909. It’s not much different from other models. The thickness of the rails could be a little unmatched for those bases. I can change rails all together of course while they are one of the concerns, too.
  9. ElMagoElGato

    Help with Alpha Revo 4000

    I looked up but I couldn’t find the ring on my machine. Eagnas is a bit simpler than Alpha. You need an Alpha friend.
  10. ElMagoElGato

    Xpider Down Pressed Clamp Base

    It’s a pretty good deal. Not that I’m getting it right now but it’s good to know. I use my coarse made Eagnas for a while.
  11. ElMagoElGato

    Xpider Down Pressed Clamp Base

    Are you sure? That will fix all the annoyance on my machine.
  12. ElMagoElGato

    Xpider Down Pressed Clamp Base

    I guess it’s a normal price for a quality cramp base. But still.
  13. ElMagoElGato

    Help with Alpha Revo 4000

    Looks pretty bad. Is it a crank machine? I wish someone who knows can respond to you. I'm sorry but I don't have courage to take my tensioner apart.
  14. ElMagoElGato

    Gamma 6XFC issues

    I hope both the problems are fixable. Otherwise, the whole machine becomes useless.
  15. ElMagoElGato

    Xpider Down Pressed Clamp Base

    Looks cool. But looks expensive, too. I'll be much more interested if the price is around $100.
  16. ElMagoElGato

    The Official Angell Users Club

    Hi, Here’s a fellow TC90 user that is very rare on this board. I’m glad to see one. Well, I ordered mine on 5th July, it was shipped on 9th and got home on 11th. It was pretty much one week.
  17. ElMagoElGato

    Angell TC95 stringing pattern?

    I don’t want to spread my shame, man. No, I’m kidding. I’m pretty sure I did it right. Like Irvin said, it’s impossible.
  18. ElMagoElGato

    Angell TC95 stringing pattern?

    I’ve put 19 to the RacketTune setting. The reading has to be off a little bit.
  19. ElMagoElGato

    Angell TC95 stringing pattern?

    Oops. I thought it wrong. I might have woven one extra cross?
  20. ElMagoElGato

    In/Out Device

    Oh, is it true? He might have lost interest then. Is he not giving out the source code? Somebody can take care of it.
  21. ElMagoElGato

    The Official Angell Users Club

    It’s a mid against a mid in my case. My prestige mid and TC90 V3 carry almost identical specs. TC90 feels lighter and has less plough through. The prestige has 303 sw unstrung and TC90 is supposed to have 295 sw. To me , sw is a good indication but lightness of hoop matters more. But it’s...
  22. ElMagoElGato

    Is it worth buying a guide/ pathfinder awl?

    I hope it is actually easier. Anyway, it is a clear instruction to follow. I’ll do it when my mind is full of challenge.
  23. ElMagoElGato

    Is it worth buying a guide/ pathfinder awl?

    I've never done ATW or am not willing to do it either. It seems tedious. I envy those who can do it casually. I'd switch around 6T and 8T between main and cross if I can't find a way.
  24. ElMagoElGato

    The Official Angell Users Club

    I played with my TC90 V3 today. It was super maneuverable thanks to its head light balance. It was especially good on volley and 1HBH. One thing not so good was plough through. It is good but not as good as PS85 that is a plough through monster. Adding some weights here and there may change...
  25. ElMagoElGato

    Angell TC95 stringing pattern?

    I just got TC90 V3 that is 16x19. I like 2 piece but the space at 11T of this stick is very small. Also, the last cross must go through blocked holes. So I'm thinking of 1 piece now. I thought the cross goes bottom up with 1 piece by looking at the racket. I'm relieved to see it.
  26. ElMagoElGato

    Is it worth buying a guide/ pathfinder awl?

    I've tried blunt needles but they never worked. PS85 has seriously blocked holes. It'd be a big help if they work. They just don't go in to the holes. If they are small enough to go in, then string doesn't go in to the needle.
  27. ElMagoElGato

    The Official Angell Users Club

    Look at my signature. I’ll play with my TC90 V3 for the first time tomorrow. It’s very similar to my Prestige Mid. I won’t compare them side by side but will be able to comment on plow through and stability. ElMagoElGato
  28. ElMagoElGato

    The Prince Phantom 93P is a gift to us from TW - My Review/AMA

    93P seems perfect except for the string pattern. I like open pattern better. I can’t change the balance or the pattern, either.
  29. ElMagoElGato

    The Prince Phantom 93P is a gift to us from TW - My Review/AMA

    I hope so because I’ll buy it anyway. I had Ficher Vacuum Pro 90 and now have Pacific version that moved balance from 30.5 to 31.5. The thing is, I’m struggling with it. It seems to have a little weight at the tip and it kills me.
  30. ElMagoElGato

    The Prince Phantom 93P is a gift to us from TW - My Review/AMA

    Thank you for your replies. I’ve got to accept the differences then. But the matching service is interesting. I’ll check it out.
Top