grip size

I have used a 2022 Boom MP for the past few years and loved it, but it's time to move on to another frame. My only conundrum is that my Boom MP is a grip size 5, and I use it with just a base replacement grip (no overgrips) to maintain the rectangular pallet bevels. I have tried many other...

My mum plays with a Babolat raquet with size 0 grip size. She feels it is slightly too big. Is there another brand where the grips feels smaller? Thx in advance.

I’m looking into leather grips and many posts on here positively recommend the TW leathers. I have a Head Extreme that is perfect with an over grip - wouldn’t want to reduce the combined size. Anyone know how the TW 1.55mm thickness compares to Head Hydrosorb stock grips?

I've decided to start getting my hands dirty with refurbishing super cheap, tired old rackets into something playable, just as a hobby. It's basically an excuse to experiment with replacement grips and sourcing replacement grommets and whatnot, and I also get to learn a lot about obscure, older...

Hi everyone, I recently came unto possession of a Head Speed MP with a 4 1/8" (#1) grip size. It belonged to my sister, who tried to get into tennis last year, but never really took it seriously. However, when I saw it I realized the grip size and was really curious since at least for me it was...

I’ve been using 1/4 grip size for at least 5 years, with the really thin Tourna pro thin grip that probably takes it down another half size. I know it’s too small for my hands (I’m 6 foot tall and have medium sized hands) but I’ve gotten used to it, and seem to have become dependent on it for...

Could someone tell me if an Extreme grip size 4 feel the same as a Pure Aero grip size 3? Thanks!

Does a Dunlop grip size 3 could be the same as a Head grip 4? I'm interested about the Dunlop CX 200 OS but the grip size 4 does not exist!...

What Head grip size if I use size 3 with Babolat? 4?

Hello, I'm struggling to find raquets with grip size 5 where I live (Switzerland). Theoretically my hand would be size L6 but I gave up searching for that. I've tried to buy L4 and then add heat sleeve or replace base grip with the thickest I've found (Karakal X-Cel Gel) but there are at least...

Hello all, I'm sure this has been asked and answered but I'm just curious about everyone's experience here. I am a 4.0 player and recently switched from a 4 3/8 size racquet to a 4 1/2. I made this change because I started developing some arm pain with my 4 3/8 and read that increasing the grip...

Hi I might gonna sound noob, but when you buy a racquet and theres different sizes ( 1, 2 ,3 ,4 etc ) Does that mean that the manufacturer makes the grip size bigger with a bigger pallet? or bigger butt cap? or it comes with a thicker overgrip? I really dont understand...

hello, I am supposed to have a 4 3/8 grip size but I've been playing with a 4 1/2 for the past 1.5 years unknowingly. Would it benefit me to switch to a 4 3/8?

Hello, Has anyone noticed a change in prince grip sizes since around 2019? I have a few old prince racquets: - precision mono ( 90's ) - pog classic ( 2014 ) - phantom 100p 1st gen ( 2017/18? ) All are 4 3/8 and the grip feels consistent. I've had many other prince sticks over the year and...

Hi, do you know which replacement grip comes with the head gravity and what’s the thickness? I used to use grip 3 but had To change the original grip with a skin feel on a t fight from 2012, then I started to play with a dunlop force98 grip2 and it was ok, feels a bit smaller but allways felt...

I have a Yonex Duel G 97 that is a 4 3/8. I usually play 4 1/4. What is the best way to get this slight reduction in size from a 4 3/8 to a 4 1/4? Thank you.

@Tecnifibre Official I'm really into the RS 300/305 racquets, but you guys don't make one with 4 1/8'' grip size, any possibility in the future? Or does anyone know if Tecnifibre grips run big/small comparing to a Babolat Pure Strike? If anyone has experience changing a 4 2/8'' racquet into a...

This seems somewhat hard to find elsewhere, so I thought anyone with experience here might be able to help me out. How do Tecnifibre grip sizes run compared to other companies? I'm currently playing with a speed pro with a 1/4 grip, but in college used to play with the tecnifibre tfight 320 in a...

Hello, So I just bought this very worn out racquet (Wilson) on **** and the seller didn’t know the grip size. The buttcap is so worn out that you can’t see a number either. Ik what my grip size is, so that’s not a problem. Just wondering if there is any way I can find out the size of the grip...

I have medium sized hands and switched awhile back from 3/8 to 1/4 grip. Seems like I could really whip the racquet better. But lately I feel like I’m struggling to find the right size. Been messing with ultrathin grips, single or double overgrip, wrapping them tight vs loose etc. This weekend...

Second post! This one is kind of a continuation of my "Tall & Athletic" post about which racquet (size, weight) to get. I think I'm measuring my hand correctly. From the crease in my palm to my ring finger is 5". Does that sound right? I'm 6'5" 215lbs. and my total hand size from base to tip...

Hi! Isn't there a Wilson Pro Staff 97 with grip 4 5/8? I just found the RF97 with 4 5/8, but this one is really heavy for me, I prefer the 315 grams version. Where could I find it? Thanks! P.S.: I'm not a big guy, but I like to remove the cushion grip and play with 2 overgrips in a 4 5/8 Wilson...

I have an old Wilson blade 104 I want to try and doctor up, however the grip size is one size too small. I was looking to use a leather grip to add weight, but might as well try to kill two birds with one stone, so is there a leather grip that is thick enough to be comparable to adding a shrink...

Hey guys. How are you? I would like to know if any of you knows how much of a difference it is. I have a friend who works in babolat and can get me the pure strike 16x19 project one seven 4 1/2 grip at a much lower price. Should I get it? Thank you!

Well, I decided to decrease my grip 4 1/2 on Prince EXO3 Tour 100. Grips were takes off and so did the butt cap. Painted the handle and planning to brush it off. See pictures below. Is the inner metal part the same size at all different grips? It's just the amount of wood around the metal...

My grip size is between 4 1/4 and 4 3/8. If I had additional over grips I loose the bevels and my racquet handle becomes round in shape. Any advise to help my situation ?