lockout

Hoping to get some clear instructions on what I should be lubricating and what I should using isopropyl alcohol on my LO machine. Currently, I'm only cleaning the clamps (teeth), rails, gripper with alcohol — but now there's alot of squeaking in the base of the clamps. I tried taking off the...

Don't know which one to go with. Seems I can't go wrong with either, but just to be sure. I would prefer the one with the best clamps, however if one is much better than the other I would obviously go with that one.

I have been stringing for 15+ years using an old (1997) Gamma ELS 6500 machine. I was able to string my frames at 57 pounds on my Wilson K-Factor 6.1 16x18 then switching to the same tension/string on my Babolat Pure Drive Tour. I sold my machine - but after about 6 or 7 non-consistent string...

Quick question — I was just watching someone string and I think I'm doing my order incorrectly. When I tension, I clamp then secure the base. To move the clamp, I then release the clamp and the loosen the base — on the latter should I be loosening the base first then the clamp as this is what I...