ps97

  1. I

    Question to PS97 v13 Owners

    Has anyone measured the strung SW of their racquet in stock (no customs) ? The SW of 321 on TW just doesn't make sense. I'd say maybe a typo and supposed to be 312 which sounds much more reasonable but it's not first time I see a measured SW on TW that seems too high ... Vcore98 was 325 which is...
  2. P

    Are any pros using the RF97/PS97 mold?

    apart from Dimitrov with his custom 18x17? It's been around for long enough now that there could be some young players coming up with it. Every Wilson pro and his dog had a ps97 paint job for a while on their six.ones- forget about them: who *really* uses it? If, like the clash, none of the...
  3. TennisandRamen

    PS97 Solinco Hyper-G and NRG2 Advice

    Hi All, First post. Hope I'm in the right area... I have a pack of Hyper G and NRG2 and want to put them together, possibly hyper g as mains and nrg2 as crosses... Any advice on stringing tension? I am using a PS97 and previously used hyper g around 53 and liked it, but didn't have as much...
  4. A

    Yonex VCORE 95 vs Wilson PS97CV

    Hi All, I used to play a lot as a junior but its been a good 15 years since I played seriously. I’m trying to get back into it, and get my conditioning backup. I’m a 4.0/4.5 at this point. My goal is be 5.0 and start playing in 18-39 tournaments again. My last racquet as a junior was the Wilson...
  5. J

    Pro Staff 97 black countervail weight

    Hi, could someone with the PS97cv help me confirm the weight of the racket? I found 2 different weights on TW... One said 332 grams and the other 327 grams. I got an used racket and it came at 332 grams with the overgrip (probably around 326-327 without the over) . Do I have one on the lower...
  6. R

    Where to get red prostaff RF97 Autograph

    Fairly basic purpose for wanting one. Want same static weight as 90, but the plow of the RF and the sweetspot of a 97. Also don't want to drop more than $200, $250 for the black stick is way too much. Don't care if the racket is used or not, just no cracks, serious damage, etc. Also is full...
  7. D

    Switch from PS97 - Flimsy?

    Hey! I have been playing with the 2015 PS97 basically since it came out (prior to that was hitting with a Kblade 93) and have always used a full bed of multi. I really do like the racquet, however lately feel like it is a bit too flimsy (not sure if that is the right word for it - unstable...
  8. I

    racquet recommendation

    hey guys, i need some help. I came back to tennis, because i had to quit with football because of an injury. from 2018 on i will have a place in our tennis team to play matches. iplayed tennis from 10-20. i needed 2 years to become fit again, now i´m happy with my game. i need a raquet that...
  9. T

    Wilson PS 2017/18 update?

    Considering the latest PS range was released roughly this time last year (I think -- given that this was when the rackets were sent out by TW to members for reviewing), any news of a similar update this year? Or is there not going to be one? I'm planning on getting the PS97, but don't know if I...
  10. D

    Multi to full poly

    Currently playing with a 2015 PS97 with x-one biphase 17g at 52lbs (played at 56 for a few years but wanted more power). Looking at switching and thinking potentially a full poly bed. Can't afford Nat gut btw. I have been recommended solinco hyper g 17g at around 50lbs or a lux Alu power at a...
  11. D

    PS97 new string

    Hi all, Currently have been playing with tecnifibre x-one biphase 1.24 strings at 55lbs for about 6 years and with a PS97. I have heard lots of good things about hybrids and am really considering changing and trying out a new string (snap them way too often and fill like I want more spin and...
  12. T

    ProStaff 97 or PS 6.1 Classic

    I have two PS 6.1 Classics in pristine condition. I have had them since about 2000 when a friend sent them to get me back playing again. Well, I started back in 2014 but with a different racquet (TF 335). The TFs are about done now- one cracked, the other a little worn. I had planned to buy the...
  13. shamaho

    Arrgh! inserting mains tie-off through teflon tubing next to impossible

    How do you guys do it ? I'm trying to tie off PSG-DF on a PS97 (at 8B) but that hole has teflon tubing and... it just doesn't want to go in.... What are option is these situations ?
Back
Top