stringing clamp

  1. N

    Biardo clamps on a Gamma Crank?

    I have an old Gamma Crank (lock out) stringer and I want to use a 2 y/o set of Bairdo clamps on it. I can’t looses that rectangular lock under the base enough to get it to slide on the table. Any advice? The Bairdo clamps are just so much smoother easier and quicker to use.
  2. Tennismom0803

    Clamps are stripping string - gamma x

    My son uses a gamma x-stringer to string his racquets with Solinco poly, 17 gauge. Lately he has had a problem with the clamps stripping the strings and preventing the machine from pulling tension. We have cleaned the clamps. Any other suggestions for how to fix this?
  3. C

    Upgrade to Auto Clamps Loosening

    Hi All, I'd appreciate any help with this issue. I changed my clamp bases from the standard Spinfire to Spinfire Automatic base clamps. Every 3-4 racquets I need to tighten the base clamps as they begin to rotate back a little, likely resulting in tension loss. Is this normal procedure? Do...
  4. O

    Alpha Axis Pro or Tourna 300cs

    Don't know which one to go with. Seems I can't go wrong with either, but just to be sure. I would prefer the one with the best clamps, however if one is much better than the other I would obviously go with that one.
  5. A

    Losing tension after clamping down string and releasing the pull

    As you can see in the video, the string loses considerable tension (10-15 lbs) after releasing the tension pull. This happens no matter how tightly I grip the clamps on the string nor how much I tighten the clamp base to the board. The base clamps do not move at all, it's the clamp itself that...
Top