fischer handles

[crism54]

someone can kindly put the photographies of the handles of the fischer, in particular the last one way magnetic tour 100 (being lightly different seems) and the magnetic speed?
does the butt cap be incorporated to the pallets handle or be removable? who has replaced the shells can write the differences with those head and volkl, are interchangeable and how much they weigh?
hi

 

[crism54]

also someone that has experience without to make the photos. I have read that there would be of the screws, you can clear the thing to me? hello

 

[counterpuncher]

I have a magnetic tour 100 and while I haven't replaced the handle I have taken it apart. It has two large plastic screws holding the two pallets together.

Removing the pallets reveils a rectangular handle shaft which could be very similar to the Head and Volkl racquets. If you could I would just try and source Fischer pallets, unless you wanted to change the shape of the grip.

The two pallets weigh in at about 20 grams from memory and yes the butt of the racquet is incorporated into the pallet as a flared base. Therfore you do not have a traditional butt cap .

 

[crism54]

thanks.
you can make some photos please in order makes to understand me well (also with the cellular telephone if you want).
the two screws hold joined the pallets and they can be screwed and be unscrewed without to damage the pallets/handle and without glue?
can you tell me your impressions, like the rigidity and the stability, according to you, is therefore flexible (58) like I read on TW?

 

[counterpuncher]

See this thread to read how I found it to play ---> http://tt.tennis-warehouse.com/showthread.php?p=1083312#post1083312

Stability is good - I have added lead tape to help a bit more, and rigidity feels more like low to mid 60's rather than high 50's.

I would like to take a photo but I do not want to remove the overgrip, grip and large amount of lead tape so that you can clearly see what it looks like.

Basically the handle has two 1 cm holes in it where the plastic screws go through the handle and each of the two half pallets. Yes you can unscrew them without damage but I did break one when re-tightening it and hence why I am reluctant to take it apart again. The plastic screws are very fragile !

If you were to use Volkl pallets you would simply be covering up the holes in the handle and using glue instead to bond the pallets. You would need also to use the Volkl butt cap as the Fischer one is incorporated into a flared bottom on the pallet.

Yes you can cut the Volkl pallets longer as a 1/4 and even maybe a 1/2 inch extension should be sturdy enough on its own.

 

[crism54]

thanks very much, and excuse me for my very bad English.
if someone wants to put its impressions is the accept well.

you confirm me the rigidity about to 62/63, the version light for this datum as you had found it (generally the light version should be a little more rigid?
where are the two screws positioned?
taken away these screws,there is not also the glue?
the submitting handle the pallets on the volkl, is flat at 6 & 12 and round at 3 & 9(looking at it with the racket leant horizontally on the table). also the fischer is like that?
because you have put the lead above the handle instead of in, it's not empty from being able to allow it?
hi

 

[crism54]

is there no one other which can talk about this racket and about its particular handle?

 

[counterpuncher]

you confirm me the rigidity about to 62/63, the version light for this datum as you had found it (generally the light version should be a little more rigid?

About 64 stiffness is my opinion only, the specs say 59.

where are the two screws positioned? taken away these screws,there is not also the glue?

About 2cm and 10 cm from the butt cap and there is no glue.

the submitting handle the pallets on the volkl, is flat at 6 & 12 and round at 3 & 9(looking at it with the racket leant horizontally on the table). also the fischer is like that?

Grip shape is similar to a Wilson

because you have put the lead above the handle instead of in, it's not empty from being able to allow it?

I have used lead tape around the handle, underneath the synthetic grip.

 

[crism54]

some pics?

 

[crism54]

is one spreading this racket? but then between the magnetic speed n1 and the magnetic tour puts off the form of the handle? some pics? hi