Free Racket Stencils

Bencia

Rookie
I am going to be updating this thread with new stencil designs. You guys can use these designs to put creative stencils on your racket.
 

Bencia

Rookie
note: if you are using this stencil, please cut the outside O in two semicircles with space in between. This prevents the stencil from turninig into a huge O when you cut it
 
Last edited:

AlpineCadet

Hall of Fame
I've seen question marks, happy/sad faces, initials, and even a whole string job coated with stencil ink. Though I'll be surprised when I see Mona Lisa on a string job. :)
 

Bencia

Rookie
If you guys have any ideas for stencils in mind, just tell me because I made the ones you see now and I can make more.
 

Bencia

Rookie
the babolat lines don't require a stencil because all you do is ink inside the bottom line area and 2 lines above it. the strings apre the stencil. as far as the P goes, I have the actual stencil but to make one like the other custom stencils I am going to need to find a good picture of the p to edit.
 

stevekim8

Semi-Pro
even if we get the design, do you know how we put it in the racquet??
do we HAVE to cut the plastics to make the stencil?

or is there easier way?
 

YULitle

Hall of Fame
even if we get the design, do you know how we put it in the racquet??
do we HAVE to cut the plastics to make the stencil?

or is there easier way?
I saw someone use cardboard. The side of a box, you know? You would have to trace the pattern onto the box and cut it out. I'd make it about 1/8 inch bigger than normal to compensate for the ink not reaching the edges. That probably doesn't make sense. But, you'll get it if you just try to cut it right on the line.
 
D

Deleted member 19728

Guest
Here is a copy of the Babolat Stencil:

_________________________________________________________________


_________________________________________________________________


Just print it out on cardboard, throw it away, and then ink the lines based on the strings!!! :razz:
 

iradical18

Professional
Could you do the old school "R" logo for the Washington Redskins? The one that Joe Gibbs always used to wear on his hat back when we were good.

Edit: This One.
 
Last edited:

babar

Professional
How about a Dunlop logo? I have not been able to find a good Dunlop logo anywhere.

I like the Nike Swoosh too. Thanks for your work on this Bencia!


PS. If you put together a Deadksins logo, then you have to make one for the Cowboys too!
 
I saw someone use cardboard. The side of a box, you know? You would have to trace the pattern onto the box and cut it out. I'd make it about 1/8 inch bigger than normal to compensate for the ink not reaching the edges. That probably doesn't make sense. But, you'll get it if you just try to cut it right on the line.
Yeah I'm using cereal boxes to make stencils. They work really well but the logo comes out a bit smaller then you'd expect :\
 

Sixpointone

Professional
One item you can use to make a Stencil that holds up pretty well is a Clear Plastic.

What I'd suggest is going to an Office Store, buying a Plastic Folder, and from that you can basically get 2 Sheets of Plastic at an affordable Price.

I personally opt for the Clear Plastic as it is a little more easy to Trace the Logo onto.

Hope that helps,
John
 
Top