How to put lead under grommets?

Gee

Hall of Fame
Recently I managed to put lead at 3 and 9 o'clock position under the CAP grommets of a Head Prestige Classic 600.
I also wondered how to do that with standard grommets, for example with a PK Black Ace 98.
Does anyone has experiences with this? Do I need to drill holes into the lead or does the lead strips fit within the rims? What tools do I need for this?

Any help would be appreciated.
 

spaceman_spiff

Hall of Fame
It depends on which type of lead tape you are using. If you are using the thin stuff (1/4 inch), then those strips should be narrow enough to fit on the fram without covering the grommet holes. If you're using the wide stuff, you might need to poke hole in order to get the grommets through.
 

Gee

Hall of Fame
It depends on which type of lead tape you are using. If you are using the thin stuff (1/4 inch), then those strips should be narrow enough to fit on the fram without covering the grommet holes. If you're using the wide stuff, you might need to poke hole in order to get the grommets through.
Ok, thanks.

I also found this post.
 
Top