K factor 2019

esgee48

Legend
@TW Staff - Will the re-stocking also include grommet strips? And hopefully the KFactor 6.1 18x20 is not parallel drilled, right? I actually know some folks with the older PSC 6.1, KFactor 6.1 and BLX1 6.1 18x20's.
 

Seth

Hall of Fame
Wouldn’t hurt my feelings if it’s the most recent Six One 18x20 repainted.
 

TW Staff

Administrator
Seth,

It looks like like were delayed a bit and we won't expect them until mid August.

Thanks,
Brittany, TW
 

TW Staff

Administrator
A little more information. Wilson will be re-releasing K Six One 95 (18x20) in a limited stock. We have not received any samples yet to confirm any specs. I have inquired about the possibility of bringing in grommets and will update the thread once I receive more information.

Thanks,
Brittany, TW
 

Moses85

Rookie
A little more information. Wilson will be re-releasing K Six One 95 (18x20) in a limited stock. We have not received any samples yet to confirm any specs. I have inquired about the possibility of bringing in grommets and will update the thread once I receive more information.

Thanks,
Brittany, TW
Will it be released in europe also?
 

TW Staff

Administrator
Moses85,

Unfortunately, at this time it does not look like Europe will be getting this.

Thanks,
Brittany, TW
 

penguin

Semi-Pro
This must be so they can produce some pro stock supplies for del potro, right?! Otherwise why would they do this? (I'm not against it at all or saying they shouldn't)
 

stingstang

Semi-Pro
This must be so they can produce some pro stock supplies for del potro, right?! Otherwise why would they do this? (I'm not against it at all or saying they shouldn't)
DelPo uses a hyper 6.1 95 but stuck with the K paintjob out of superstition after winning the US.

Wilson probably aren't making the 6.1 95 because it would eat into more profitable RF97 sales. Re-runs like this keep the hardcore fans happy until *hopefully* it gets reintroduced properly. It's still a very popular frame with lots of Pro's like Agut, Edmund using under other paint.
 
Last edited:

TW Staff

Administrator
The K Six One unfortunately has been pushed back to a delivery date of early September.

Sorry,
Brittany, TW
 

esgee48

Legend
This delay just decreased demand cuz I only clients with the BLX 6.1 now. The others have switched to newer frames in their attempts to keep up with younger players.
 

Addxyz

Semi-Pro
Hi @TW Staff , how different are these reissues versus the originals? In the past reviews the SW is listed at 340 whereas this one has an avg SW of 336.

Thanks!
 

TW Staff

Administrator
Hi @TW Staff , how different are these reissues versus the originals? In the past reviews the SW is listed at 340 whereas this one has an avg SW of 336.

Thanks!
Hi Addxyz,

Good question! It’s not uncommon to see up to a 10 point fluctuation in swingweight. That said we are reconfirming with Wilson that there are no changes.

Thanks,
TW Staff
 

Addxyz

Semi-Pro
Hi Addxyz,

Good question! It’s not uncommon to see up to a 10 point fluctuation in swingweight. That said we are reconfirming with Wilson that there are no changes.

Thanks,
TW Staff
Hi @TW Staff what is the unstrung swingweight?

Thanks!

Sent from my Pixel 2 XL using Tapatalk
 

TW Staff

Administrator
Hi @TW Staff what is the unstrung swingweight?

Thanks!

Sent from my Pixel 2 XL using Tapatalk
Hey Addxyz,

The samples that were spec'd for the website averaged 306 (unstrung). Swingweight varies with each frame. It's not uncommon for it to change by 2pts just by flipping the racquet over on the RDC machine, and, as mentioned above, a 10pt difference between two different samples is not uncommon. If you want a specific swingweight, give us a call.

Jon
 

Addxyz

Semi-Pro
Hey Addxyz,

The samples that were spec'd for the website averaged 306 (unstrung). Swingweight varies with each frame. It's not uncommon for it to change by 2pts just by flipping the racquet over on the RDC machine, and, as mentioned above, a 10pt difference between two different samples is not uncommon. If you want a specific swingweight, give us a call.

Jon
Thanks! I made a call, just waiting to hear back.
 
Top