I use a Silent Partner Drop Weight. I have no problems stringing the first 4 mains. As I start spreading out to the edge from the center, the mounting system gets in the way of the flying clamps forcing me to place it further and further away from the optimal position for retaining tension (which would be as close to the frame as possible). I have seemed to found a solution to this. Place the flying clamps upside-down on the mains. This way the mounting system doesnt get in my way. However, I havent seen anyone mentioning this. And from all the instructional pictures and videos, the clamps on the mains are always hanging down and never hanging "up". Is this a valid method? Any drawbacks to hang it against the natural pull of gravity? Thanks!