Possible typos on TW.com for Yonex RD ti80

Preston

Rookie
Hi TW,

I think there may be some typos on your page for the new Yonex Ultimum RD ti80. Here is one thread on it http://tt.tennis-warehouse.com/showthread.php?t=330902

I'll try and bullet point the ones in question.

-Lists HH instead of HL(pretty sure that's wrong)
-Stiffness of 64, should this be 61?
-list string pattern of 16/18, should be 16/19?
-lists beam as 20mm/19mm Swan thinks it should be 19mm/20mm
-Grip states leather, should this be synthetic?

Any input on this would be greatly appreciated, specifically the flex rating. Personally I'm hoping for the 61 rating.

Thank you!

P
 

Swan Song

Professional
Hi TW,

I think there may be some typos on your page for the new Yonex Ultimum RD ti80. Here is one thread on it http://tt.tennis-warehouse.com/showthread.php?t=330902

I'll try and bullet point the ones in question.

-Lists HH instead of HL(pretty sure that's wrong)
-Stiffness of 64, should this be 61?
-list string pattern of 16/18, should be 16/19?
-lists beam as 20mm/19mm Swan thinks it should be 19mm/20mm
-Grip states leather, should this be synthetic?

Any input on this would be greatly appreciated, specifically the flex rating. Personally I'm hoping for the 61 rating.

Thank you!

P
To be specific, 19mm. in the shaft and 20 mm. in the head.
 

samster

Legend
These are the specs from the 2005 Ti-80

Midplus Specs
Head Size:
98 sq. in. / 632 sq. cm.
Length: 27 inches / 69 cm
Strung Weight: 12.1oz / 343g
Balance: 8pts Head Light
Swingweight: 315
Stiffness: 64
Beam Width: 20 mm Head/19.5 mm Shaft
Composition: High Modulus Graphite/Ultimum Ti Fibers
Power Level: Low
Swing Speed: Fast
Grip Type: Yonex Cushion Grip
String Pattern:
16 Mains / 19 Crosses
Mains skip: 8T,8H
Two Piece
No shared holes
String Tension: 55-65 pounds
 

Love50

Rookie
I'm trying to check the available grip sizes and the pop-up is not working... (click the order button on the main product page).

UPDATE: Looks like it is fixed, thanks :)
 
Last edited:

Swan Song

Professional
Is there a way you can re-check the width on the racquet? Because the shaft cannot be 20 mm. and the racquet does not exceed over 21 mm. at all.
 

TW Staff

Administrator
Is there a way you can re-check the width on the racquet? Because the shaft cannot be 20 mm. and the racquet does not exceed over 21 mm. at all.
After measuring a handful of frames again, there are no parts that are less than 20mm (shaft), while the tip and hoop are at 20.5mm. (avg).

Could be the batch we used to measure is slightly varying from Yonex's printed spec.

Spencer, TW.
 
Top