For a long time the raquettune app for me has been very decent for me, but the past few weeks every re-string I have done has been WAY off. Raquettune has been reading WAY over. I calibrated my Wise 2086 with a Wise 2090 calibrator which was BANG on correct. I have just strung a Pure Drive with 1.25 Poly @ 55lbs. I did a tension reading immediately after completing the restring and it read 64lbs on raquettune. I did the test 5 times, same results. I decided to delete the app and re-install it straight away (this took all of appx 45 seconds). I then did another tension reading , and now it shows just under 58lbs!!! What the hell is going on with this app? 6lbs tension loss is just under a minute? I don't think so! Also the string bed doesn't feel as tight as what 64lbs would be.
Raquettune app been WAY off recently
- Thread starter LHM
- Start date
triple checked all of that!
LOBALOT
Legend
I found when I upgraded the app my racquet settings changed and this set everything askew. I found racquets that I had setup for 16x19 were 18x20 (Or vice versa I don't recall) but this caused my readings to be way high. So now I just double check my racquet settings for pattern and head size. I also find that there is a range setting for the lbs/tone and I need to adjust it sometimes as either the reading is really low (like 20 lbs) or it does not "hear" the twang of the strings at all. Either way it is obvious and I just adjust the range. I like the app. it works great for our family.
CosmosMpower
Hall of Fame
No issues for me, when there was an update around 6-8 months ago i thought it was off but the app wasn't remembering my string settings per each frame.
LOBALOT
Legend
That is exactly the issue I was referencing but again I dealt with it and that was that.
TimeToPlaySets
Legend
It is garbage that does not even register a response on Android.
DO NOT BUY if using Android. Defective
DO NOT BUY if using Android. Defective
Similar threads
