Roger’s BLX90

Mass: 364g

Balance: Varies, reports between 31.8 - 32.4 cm
The distribution goes like this: 31.8, 32.0, 32.1, 32.2, 32.2, 32.4

Swingweight: Estimated around 353 or 354

Sources:
http://tt.tennis-warehouse.com/showpost.php?p=5094287&postcount=294
http://tt.tennis-warehouse.com/showpost.php?p=3916281&postcount=1
http://tt.tennis-warehouse.com/showpost.php?p=3591531&postcount=192
Now all we need to know how HL it is? And how so you go about measuring that accurately.
 

70後

Hall of Fame
The lates 90 paintjob is really good. White, red and gold pin stripes. Ironic that the first good 90 PJ since the ncode and Fed doesn't use it.
 

tennis_hand

Hall of Fame
reverse thinking. what benefit is there if wilson gives roger a different spec and sells to public a different racket? the cost of manufacturing 2 different specs is pretty clear to wilson.
 

adip89

New User
Yup. Those are my knots. Or, as Nate calls them, "Those beehive looking pieces of sh*t."
Hi Ron, could you explain exactly what kind of knot is it and how to do that? I can't figure it out from that pic.
I'm just curious, do you make power pads on your own or buy them?
Thanks.
P.S. You guys @ P1 rule, I'm a big fan of your work
 

Gerco

Rookie
Hello Fabfed, could you measure the entire length of the racket in cm. I´d be glad if you could. I believe the length is really important respecting the balance. Also if you like to measure Rafa and Nole´s rackets too to see if there is any difference... Thanks!!!
 
Last edited:

oble

Hall of Fame
Hello Fabfed, could you measure the entire length of the racket in cm. I´d be glad if you could. I believe the length is really important respecting the balance. Also if you like to measure Rafa and Nole´s rackets too to see if there is any difference... Thanks!!!
I think FabFed is no longer active on this forum.
 

DannyJK

New User
Does anybody know how this racquet was strung?
the top tie off cross knot @9h, how did the stringer do it..... any information would be very much appreciated.

I'd like to know because, I have to start my cross knot on a main.
 

ls206

Professional
Maybe someone from P1 can confirm but I imagine they used a starting clamp so they could tie off on the cross.
 

polksio

Rookie
The first and last three letters? P-L-T-Y. I'm a PLTY? . . . Introduce a little anarchy, upset the established order, and everything becomes chaos . . . I'm an agent of chaos . . . And you know the thing about chaos? It's fair.
Holy cringe


So who is incorrect in you opinion FabFed & ArtArt or Greg who's racket did not even have lead when P1 said and showed pictures proving they put lead on the rackets???
I know it's been a while but where's the source on this?
 
Top