Strings and tension for Wilson Profile Hammer 2.7 95sq.in. ?

[baselinespinner]

I just got a Wilson Profile Hammer 2.5 95 and wanted to get opinions on what string to put on it. I have the following:

Gosen OG Microsheep 17 synthetic gut, 16,- 17- and 18G polys.

This is considering that the frame is very powerful, light (under 10oz strung, including overgrips), head-heavy and very stiff. I gathered that the racket is suitable for mostly flat hitters, but I'm looking for control and spin when I use it.
I guess I can try multiple setups and find one that has most of the power, some spin and sufficient control.

I will likely do a hybrid setup and put the Microsheep in the crosses.

Looking for recommendations on what to put in the mains, and tensions for both. TIA

 

[PBODY99]

50lbs.18 g poly M / 48lbs.17 g OGMS
This is how I last strung my Pro Staff 4.0 Hammer 95 which has a 18 x 20 pattern.

 

[Donmikan]

I just got a Wilson Profile Hammer 2.5 95 and wanted to get opinions on what string to put on it. I have the following:

Gosen OG Microsheep 17 synthetic gut, 16,- 17- and 18G polys.

This is considering that the frame is very powerful, light (under 10oz strung, including overgrips), head-heavy and very stiff. I gathered that the racket is suitable for mostly flat hitters, but I'm looking for control and spin when I use it.
I guess I can try multiple setups and find one that has most of the power, some spin and sufficient control.

I will likely do a hybrid setup and put the Microsheep in the crosses.

Looking for recommendations on what to put in the mains, and tensions for both. TIA

2.5 or 2.7? If its 2.7, could you please tell me its swingweight?

 

[baselinespinner]

2.5 or 2.7? If its 2.7, could you please tell me its swingweight?

Sorry my mistake, it's a 2.7.
Swing weight seems to be 346 per the specs here: https://racquetmuseum.com/wilson-profile-2-7-95/

 

[Grafil Injection]

Sorry my mistake, it's a 2.7.
Swing weight seems to be 346 per the specs here: https://racquetmuseum.com/wilson-profile-2-7-95/

Those specs are for the Profile rather than the Profile Hammer. The latter is 3oz lighter, mostly out of the handle, but still must have a lower SW.

 

[baselinespinner]

50lbs.18 g poly M / 48lbs.17 g OGMS
This is how I last strung my Pro Staff 4.0 Hammer 95 which has a 18 x 20 pattern.

I went with 50lbs on the the main (Volkl VPro 18G) and 53lbs on the crosses for OGMS
The power is still there but the balls stay in (I tend to put top on most of my baseline). I'll find out more when the mains lose some tension. Thanks!