*** T-Fight Club***

demoed the 320 16m again tonight and had the same experience, huge nasty vibrations. this one was strung with nrg2 at 57#, and I put in a spare dampener I had. my tennis elbow has been gone for a couple months, and within 5 games, it was back with the TF. I struck a low ball with my backhand near the top of the string bed, and the metallic vibrations were ridiculous, but even well struck balls in the sweet spot had this harsh feeling. I think it probably plays better strung in the low 50s, but I have a hard time thinking that the vibrations would stop.
 
The 320 demo I got from TW was indeed a little harsh at times, so I demoed with the dampener in and it was a little better. There was enough there to convince me to buy it and play with the strings and tension myself. Strung it with pure gut and its absolutely heavenly.
 
yeah ive heard that the tfight 335 have rather short handles does that go the same with the 320's?i have a 2hbh so i was wondering if they are indeed short.i might go with the 320Xl if they are.thanks
 
yeah ive heard that the tfight 335 have rather short handles does that go the same with the 320's?i have a 2hbh so i was wondering if they are indeed short.i might go with the 320Xl if they are.thanks

I have a 2 hander and never had a problem with (or really even noticed) the shorter handle length. The MG Prestige Pro has a similar length grip. I think it really depends on the user. I have demoed the 335, 320, and Tflash 310 and my choice, by far, was the TFight 335. Hits a huge, heavy ball, serves like a beast and is surprisingly easy to swing and maneuverable. I found it the most stable (even when compared to a leaded up 320) and best volleying racquet in Tecnifibre's lineup.
 
was the 320 longer then the 335 or no?idk im stuck on what to do really.id prefer the weight of the 335 and string pattern but i hate shorter handles like dunlops but if i go to the extended length my timing is goin to be off and its an 18by20 and i havent ever used one.
 
The 320 xl grip is longer than the standard 320's and 335's. With a longer new grip or overgrip the standard handles can be made to fit for a two hander.
 
If it's the 320 vs the 335 you're worried about, i'd choose the 335. Unless you want to experiment with lead tape, the 320 swung way too easily for me. I'd imagine the 335 gives some extra pop on the serve too.

Yeah, but doesn't the 335 go to the other extreme and swing too heavy? For me anyway, the 325 or perhaps the 320 XL sounds like maybe the best fit.
 
The 320 xl has a swing weight of 336. It swings a little heavy. Great stick for a strong baseliner or an advanced all-court player.

320 standard may be a good choice for you. Lead it up...............
 
Yeah, but doesn't the 335 go to the other extreme and swing too heavy? For me anyway, the 325 or perhaps the 320 XL sounds like maybe the best fit.

i won't recommend the 320xl. it gave me really bad shoulder pain, and didn't feel as crisp as the 325. the 325 is the best tf racquet ever made imo.
 
Leelord, everyone,

Can you please confirm the SW of the 325?... BTW, I do take heed of your cautionary advice re the 320 XL's harshness.
 
I had my T-fight 335 since about 5 weeks ago when i sold it to a friend.
One of the best looking racquets ever IMO.
It just wasnt what i was looking for in a racquet.
 
TF 320 strung at 70lbs w/pro hurricane tour 17L -
depending on weather and court conditions i use between .5 to 1 full oz of lead at the 12 o'clock point. awesome stick

I will have to get a few more and stock up as the new graphics are but UGLY!
 
TF 320 strung at 70lbs w/pro hurricane tour 17L -
depending on weather and court conditions i use between .5 to 1 full oz of lead at the 12 o'clock point. awesome stick

I will have to get a few more and stock up as the new graphics are but UGLY!

1 oz at 12!!!... I've got to hear more about this!... What does this do for the frame?... Where else do you put the lead (like 3 and 9... how much?)... Maybe I'll do a little experiment with my 320?
 
TF 320 strung at 70lbs w/pro hurricane tour 17L -
depending on weather and court conditions i use between .5 to 1 full oz of lead at the 12 o'clock point. awesome stick

I will have to get a few more and stock up as the new graphics are but UGLY!

:shock:

my elbow hurts just thinking about that!
 
hmm fancy a little tryout of the 320 or 325 anybody got any they wanna send to England cheap to help me out?
 
Leelord, everyone,

Can you please confirm the SW of the 325?... BTW, I do take heed of your cautionary advice re the 320 XL's harshness.

Conversely, I used the 320 xl during a bought of TE. It cleared up. Although it is a little heavy and I feel it's somewhat stiff, for me it remains easy to my arm.
 
i just bought 3 T-Fight 325's, time to customize, cut down to 27 inches, first test is spec'd out to 370 grams, 333 swing weight, and about 10 points or just over 31cm balance.....i hit with it cut down and no lead and it felt like the head of the racquet was getting out in front of me, so maybe this will slow it down....it feels fine but the 370 number worries me a bit but we will see:)
 
1 oz at 12!!!... I've got to hear more about this!... What does this do for the frame?... Where else do you put the lead (like 3 and 9... how much?)... Maybe I'll do a little experiment with my 320?

Sorry not ALL at the 12 - i center the strip at the 12 - depending on what brand of tape i use (various thickness) - the strip runs in general from 11 to 1
I am 46 and 6'3" and 195 lbs - I grew up with 13.5 wood sticks - played with 6.0 PS for 10 years at almost 13oz. (I remember when sticks averaged 14oz!)

In high school i played with a Addidas Hallet/ Nastase 4 3/4 MEDIUM! can you imagine - I hate hitting with these 10.3 oz flyswatters out now!

I would also only use that much weight on days with alot of wind - I like the heavy feel on Windy days

It pulls the sweetspot towards the top of the frame - If i mishit its usally due to being a step slow - old age cathing up with me.
 
Kinda liking the set up of my 325's, 27 inches, 370grams, 330ish swingweight, 10 points HL, stomped some dude 6-1 with it, but he was a def weaker player, if my timing was good the weight did so much to help, and this racquet finally dispelled the myth/prejudice i had against 18x20 patterns, spin production was ample when i needed it, and i was using either POG LB's or POG mids, both spin monsters, thanks T-Fight's(and yes i am very aware of the honeymoon stage of new racquets, hope the charm last!)
 
For reference on the specs of the 325 -

well i measure mine on a Prince Racquet Diagnostic Machine, plus they highly customized, but my original specs on all 3 of my racquets were close to that, but the swingweight listed there is high compared to what mine spec'ed out to, not close to 335, mine were 310-315'ish
 
got your email the other week, btw, but decided I'll keep all of them for now - sorry.


Hey no, thats fine man, I think the fact that you dont want to part with them maybe means i am on the right track, so I will keep my eyes open and pick some up at some point. Best wishes tho Nickynu
 
I just picked up some 335s...will be testing them out tonight. Also...I finally had a chance to weight my 320s. With the lead tape configuration I mentioned earlier...they both weighed exactly 12.2 oz. Perfectly matched. If I take to the 335 I will might sell my 320s.
 
I just picked up some 335s...will be testing them out tonight. Also...I finally had a chance to weight my 320s. With the lead tape configuration I mentioned earlier...they both weighed exactly 12.2 oz. Perfectly matched. If I take to the 335 I will might sell my 320s.

Hey guys,

So I just got home from hitting with my new 335s for about 2 hours. I gotta say...they were just too heavy for me. If your timing is off at all...the ball is gonna fly in the wrong direction. I believe the 335 is listed at 12.4 ounces...that is only .2 ounces heavier than my 320s. However, they felt a lot closer to 13 ounces. When I made contact right in the sweet spot it did feel pretty amazing...especially on overheads and volleys. That said, I just think it took to much work and energy to really take advantage of this stick's abilities. For those of you who like a heavier racket though...this might be right up your alley. If any of you are interested in acquiring these I will let them go cheap...or trade straight up for a 320.

You can email me at admin@TheRandomSchmooze.com
 
Why are the specs so off from Vendor to Vendor on Tecnifibre Racquets.From stiffness to recommended tension on strings.Iam sure it has been discussed but Iam new to the Tecnifibre club.Thanks form your help
 
alrigth thanks alot thats like the last question i had cause no one would tell me.im goin to be purchasing a tfight 335 then soon.thanks
 
I know...the grips are nasty....

TF335s and TF320s on the right

Fam1.jpg
 
or better yet anyone using the tecnifibre 320 XL can u tell me if the grip is large or not.im using a 4 1/2 in babolat and was wondering if there smaller or larger
 
Why are the specs so off from Vendor to Vendor on Tecnifibre Racquets.From stiffness to recommended tension on strings.Iam sure it has been discussed but Iam new to the Tecnifibre club.Thanks form your help

Exactly my question that no one can answer precisely...
What is the recommended tension on 320 (16x20) -- anyone knows? According to TW it is 55-65 lbs, other sites specify 49-57 lbs. TW specifies 49-57 for 335 which does not make sense...

There is nothing written on the racket or on TF web page...

I have seen people mainly stringign them at 55-57 lbs (lower end) and some at 52 lbs, but no one at lets say 63 lbs...

Does anyone know what is the exact recommended tension range for TF320?

Thanks!
 
Found It!

For ALL people -- the recommended tension is written on the frame -- inside the head! Very unusual.
It says: Power 49 lbs; Control 57 lbs! for TF320.
It also says Stiffness is 68.

Cheers!
 
For ALL people -- the recommended tension is written on the frame -- inside the head! Very unusual.
It says: Power 49 lbs; Control 57 lbs! for TF320.
It also says Stiffness is 68.

Cheers!

68 is stiffness on unstrung racquet. The stiffness drops when strung, that's what I have read here.
 
Back
Top