type of handle rackets VANTAGE ?

[crism54]

the type of handle of rackets vantage are made of solid foam pu (as prince, wilson, Babolat) or formed by two shells removable pallets (as head,Volkl and fischer)?

is it possible to purchase them and afeter replace them (the company sells them) ? Can you can show pictures please?

 

[jayserinos99]

Pallets. You can pick up pallet sets directly from Vantage. I don't have a good camera with me at the moment, but I have a few of the W-shaped L2 pallets.

 

[Chauvalito]

Pallets. You can pick up pallet sets directly from Vantage. I don't have a good camera with me at the moment, but I have a few of the W-shaped L2 pallets.

Wait, so I could get Wilson style pallets from Vantage...and attach them to my Volkl/Head rackets?

 

[crism54]

Pallets. You can pick up pallet sets directly from Vantage. I don't have a good camera with me at the moment, but I have a few of the W-shaped L2 pallets.

can please weigh them jayserinos99 and to tell me the weight without butt cap?
have you purchased them separately and therefore are they in sale or together with the rackets?

 

[jayserinos99]

The original intent was to stick on the L2 pallets onto my Head racquets as an experiment, but the Vantage pallets won't exactly fit onto the handle. Turns out the inside of the Vantage pallets aren't wide enough so I'd have to sand down the inside. I've been told that the Vantage pallets will fit on Volkl handles but I haven't tried this out.

For comparison sake, I took a set of **** L3 round pallets and weighed them against my Vantage L2 W-shaped pallets. L3 = 15g; L2 = 25g.

 

[crism54]

the graphite inside that form the part of the handle, from the most narrow to the widest it follow this orde: Head< volkl< fischer.
with a little work on the inside of the handles Volkl, but only in size l4 or L5 you can put them to fischer racket, but it is not easy (and the weight decreases of so much).

can you put a photo of the separate handles, where to see the inside to understand?

 

[jayserinos99]

Sorry crism54, I don't have a camera that can take that kind of detail. I can sort of describe it however. If you look at Head pallets, they are very rectangular on the inside of the pallet; the edges are much more defined. The Vantage pallets aren't as defined on the inside edges and the side walls don't go straight down but slightly outward.