Upgrade to Auto Clamps Loosening

Casfrank

New User
Hi All,

I'd appreciate any help with this issue.

I changed my clamp bases from the standard Spinfire to Spinfire Automatic base clamps.
Every 3-4 racquets I need to tighten the base clamps as they begin to rotate back a little, likely resulting in tension loss.

Is this normal procedure?
Do you have any tips to secure the base clamps so tightening isn't necessary so frequently?

Thank you for any feedback.
 

OldManStan

Rookie
Get a microfiber towel, wet it with some isopropyl alcohol and wipe the underside of the tracks. I use my pinky and an allen key to help clean it.
I'm not familiar with the Spinfire base clamps, but on the underside of my Baiardo base clamps, it has a brass T-shaped part that clamps onto the tracks. I clean that as well with the microfiber towel, isopropyl alcohol and an allen key to get into the small crevices.
 

Casfrank

New User
Get a microfiber towel, wet it with some isopropyl alcohol and wipe the underside of the tracks. I use my pinky and an allen key to help clean it.
I'm not familiar with the Spinfire base clamps, but on the underside of my Baiardo base clamps, it has a brass T-shaped part that clamps onto the tracks. I clean that as well with the microfiber towel, isopropyl alcohol and an allen key to get into the small crevices.

Thank you for the reply. I'll give it a go.
 
Top