Want to try doing ATW on apd /pd using this method

[Jster]

Basically , the way to tie the short side will be
1st to 4 rd mains normally then 5 , skip 6 , then 7 , 6 , tie off at 7T

Long side will be 1 to 7 on the mains,

Start doing the cross on the 2nd cross,

Weave 3-16, skip 17 , weave number 18 cross , weave last main , weave first cross , weave last main on the opposite side , weave number 19 cross, weave number 17 cross , tie off at 18c.

Question : is this feasible ? Any reason why I should not do that due to raquect 's structure? Just a question.

 

[Irvin]

You may create uneven pressure of the two sides of the frame by stringing the mains differently. Babolat recommends string two piece to avoid sharp transitions in the corners (weakest part) going from mains to crosses and you're doing a sharp transition in each corner. Why complicate the stringing process - just string two piece, what's wrong with that?

 

[MAX PLY]

Agree with Irvin. Why risk it? I also suspect stringing it in this manner may void your warranty (it certainly should).