Yonex V core duel G330 cross tying knots location

#2
Top should be either 6Hoop or 7H, whichever is bigger. Bottom should be 11Throat or 7T. Should be the same as the Tour G which is 7T. HTH.
 
#4
7H and 8H is shared holes with main...only possible place I can think of is 9H, it has the bigger grommet hole since I have the main tied off at 6H...but how would I start a cross with no strings in that grommet hole?
 
#5
7H and 8H is shared holes with main...only possible place I can think of is 9H, it has the bigger grommet hole since I have the main tied off at 6H...but how would I start a cross with no strings in that grommet hole?
Except for tie off locations I did not think there were any shared holes on the G 330, and I think the mains skip 8 H&T.
 
#8
Ty MS...was communicating back and forth with yonex when you posted this...

And yes starting clamp is the only way...first time ever running into this type of pattern...gave me a brain freeze lol
 
#9
Anyone know the location for the cross starting knot (2pc stringing) for yonex v core duel g330?
You mean the G97 (330 g) racket I assume. Are you stringing the racket with a hybrid or one string full bed. If you're stringing full bed you can string one piece. If you're stringing 2 piece you can't use a starting knot and the top cross ties off on the 5th cross.
 
Last edited:
#14
Instructions from Yonex for 2pc stringing

16 Mains, 20 Crosses,
Shared Holes: 7H, 8H, 8T

MAIN:

Start @ Head,
No Skip
Tie off @ 6H & 6H

CROSS:

Start @ 7H with starting clamp,
Weave through 8T,
Tie off @ 9T
Return to 7H, pull tension and clamp,
Tie off @ 9H

Hope this helps for those in need
 
#15
Instructions from Yonex for 2pc stringing

16 Mains, 20 Crosses,
Shared Holes: 7H, 8H, 8T

MAIN:

Start @ Head,
No Skip
Tie off @ 6H & 6H

CROSS:

Start @ 7H with starting clamp,
Weave through 8T,
Tie off @ 9T
Return to 7H, pull tension and clamp,
Tie off @ 9H

Hope this helps for those in need
Want to bump this thread as I am in the process of buying a Duel G 97 (310 or 330 haven't decided). It looks like starting clamp is a must for this frame if stringing 2 piece. Owners of this frame, please confirm if that's the case. It seems like this is the only iteration of the vcore series that does not have shared holes which makes it tricky to string 2 piece.
 
Top