Search results

All great machines, I'd get the SP swing if i were you. But they're all good and X-2 and string pal are probably the same. You might see the clamps tilting to certain sides when tensioning, but this is probalby normal. Even some of hte electronic ones you can physically see the clamps move when...

the Champion's Choice is the same gut as other gut. Infact they charge more for the guy in Champion's Choice than normal gut. But its the same gut in a different package. i'd suggest you buywilson gut and luxilon bb seperately because it's probably cheaper and you'll get 2 sets of strings if...

My friend bought one and his included strings and everything - no DVD though./

You don't have the hex keys, stringing tools or anything either? I can live without strings but tools no, lol.

Gun, Pointblank Wilson Factory Manager Expensive Plane Round Trip Ticket to China. Hope you don't get arrested.

Hmm....So how much are they worth for us young folks. :p

yeah this is how it works but it seems that sales of Revo's have been very slow lately. I dont think you get a starting clamp or calibrator ever...

he means flex wise.

shhhhh, before too many people find out =] I Wanna buy one

Axis Pro is basicly alpha + stand.

The klippermate clamps probably arent the best clamps you'll find around, But they should be fine in stringing racquets. They will lose more tension than fixed obviously but not make you have to restring again.

Its in my basement atm, I've calibrated it at my house and for some reason it was exact when it was at my house but was off by a pound at his. , Probably my fault.

Its the prince NEOS 1000 and well i got it for 230 because he was missing the hex keys :D Yeah Its a steal, It looks pretty new not sure how old it actually is. Its off by a single pound but I don't mind. I cant calibrate without the hex keys but I'll buy one in a few days. No tools though...

good point, So OP do what you like :)

If you cant string all racquets in 2 piece, then how do you do hybrids on those racquets.

at least your arm will fall off in style =] Yellow strings are sexy.

You can string ALL racquets 2 piece however you cant string every racquet 1 piece because 1 piece applies more pressure to the racquet.

Luxilon is the problem. Polys are very stiff which means they dont stretch like synthetic strings. You really have no solution other than cutting an extra foot or having to use a bridge every time. The only solution i can think of is getting a reel where you can cut as much as you want :)

Why not demo them and see which one you like?

Luxilon ALU power is great, good spin and good power. However the string like most luxilon dies very fast, so be prepared to cut strings out alot.

This is probably NOT the stringers fault. You probably shanked the ball on the last cross ( double hit probably) and well the strings at the bottom have really loose tension so they snap much easier than the others. Besides 3 days with syn gut? Thats hardly new anymore.

Its safe but not tested, if your racquet breaks dont come back and complaining ;)

I have a problem with low level players using the K90 and racquets that are THAT much more demanding. It is funny and hard to watch at the same time. I mean they try to use the racquet but its to heavy and doesnt produce enough power that they end up injuring themselves or don't improve.

Yes it is probably a stringing error or even a bad set of strings. 1lb difference shouldn't make any difference even if your a pro. Even pro's don't know what tension they use exactly because every tournament has different machines with different calibrations and clamps etc.

String how you like, I personally like my NXT around 56-58 or else it makes it feel really powerful. However Kgut is a bit stiffer so stringing a bit lower should be fine.

Stringing higher makes your racquet stiffer and causes the ball to pocket less than normal. You have to adjust your timing to fix this. Instead of hitting the ball like you normally do, hit it a bit later so the stroke is longer allowing you to control the ball better and your body is more...

Its hard to tell because calibration of the machines may be off. however I'd say 15% of the tension from crank to CP should be enough.

Are you using a Crank? if so then it makes sense it would affect it as your keeping the spring tensioned to a certain point. Everything with tension will lose tension and when theres no tension theres nothing to lose so its safer to just set to 0 then to have to recalibrate every few months.

Don't stencil polys, They WILL come off in like an hour and make your balls disgustingly red/black/stencil color. and any stencil ink will work, they're all the same. There arent any poly stencil inks though, which sucks because polys don't absorb the ink at all.

You've had the strings for VERY VERY long time. I wish i could keep POSG that long...Lasts me 3 days....