Dimension for Head 3-in-1 Swingweight Tuning Machine?

[offcourtoncourt]

Hello all, I am about to getting this Head 3-in-1 Swingweight Tuning Machine: https://tennisgiant.com/products/head-swingweight-3-in-1-machine

Just wondering if anyone has the dimension for it? don't know if I have enough table space for it....

Thank you all

 

[fritzhimself]

It is pretty much 60 x 30 cm.
So with 80 x 40 cm and an AC outlet nearby, everything should fit.

 

[esgee48]

Make that you also have enough room to swing the racquet.

 

[offcourtoncourt]

Darn… my table is little short 58.5 x 40.. thank you all for the help tho

 

[Soundbyte]

Man I would just buy a scale, Briffridi, and balance board and spend the $2000 difference on something else, like putting it towards a Baiardo.

These swing weight/ tuning machines are massive rip offs

 

[fritzhimself]

..........should still turn out if it can overhang - the adjustable feet are 56 cm in length.

 

[offcourtoncourt]

..........should still turn out if it can overhang - the adjustable feet are 56 cm in length.

That would be nice, but I am planning to fit it in my book shelf, and the width is maxed at 60cm. Depths and hight I have no problem with it. Just the width..

 

[esgee48]

Be careful when moving these devices. You may or may not need to calibrate them if you jar the unit. Definitely use on a LEVEL surface otw the results are not going to be accurate. Most shops I know that have such units don't move them. Those same shops never seem to check the calibration periodically. I gave up after getting some racquets checked. Made some minor lead tape adjustments according to TWU Racquet Customizer and the 2nd readings were way off.

 

[offcourtoncourt]

Be careful when moving these devices. You may or may not need to calibrate them if you jar the unit. Definitely use on a LEVEL surface otw the results are not going to be accurate. Most shops I know that have such units don't move them. Those same shops never seem to check the calibration periodically. I gave up after getting some racquets checked. Made some minor lead tape adjustments according to TWU Racquet Customizer and the 2nd readings were way off.

Yes, that’s why I want it to fit in the shelf and I am done with it problem is the shelf width maxed out at 60cm… I may need to buy a table..