Very confused by Stringing specs for this new racket

TimeToPlaySets

TimeToPlaySets

Legend
I am stringing a Prince Textreme Tour 100 (310).

Sadly, this racket is not even listed on the Prince website.
http://www.princetennis.com/tour

The racket is 16x18

On this website, the specs are as follows:
https://www.klipperusa.com/stringing/viewpattern.php?mfg=TPRI


Skip Main
8T - 8B

Tie off Main
7T

Start C
8T

Tie Off C
9T - 7B

Can someone verify if I am even using the right numbers?

I did skip the 8th grommet for the mains.
So far, so good.

First issue
I had to tie the mains at 6B (Not 7T)
Not even the correct side of the racket??
How does this happen?
I don't understand how this adds up with 16 mains.
I started the mains in the center, at the throat.

Second issue
I tied the cross starting knot at 7T (not 9T)
It was physically impossible to use 9T
since the existing main was blocking the side at which the 2nd string would pass thru the grommet.
I am not sure how to explain this in words.
Cross string to be tied is entering the grommet from left side.
The the existing main is going to the right.
So, the strings would criss cross if you tried to use this grommet.
It is literally impossible to use this 9T grommet to tie the starting knot for the cross.
I used 7T

Third issue
I finished the cross at 4B (not 7B)
Same issue as above. Physically impossible to use 7B, since the string is going in the opposite direction, and blocks a 2nd string from entering that grommet from the right side

Also, this Prince racket has markings at certain grommets.
There are dots and arrows at 6, 7, 9 on both top and bottom
However, the dots and arrows do not synch up.
6T, 7T = dot
9T = arrow
6B = dot
7B, 9B = arrow

No idea what these dots/arrows mean.
 
esgee48

esgee48

G.O.A.T.
rs.php


This is the Textreme Tour on TW website. It matches up with the instructions from KlipperUSA. The last mains go from the 'throat' to the tip where you tie off. Post pictures of the frame strung by you.

Dots on the frame indicate that the hole is for a main. No dot means it is for a cross. The arrows probably indicate a tie off spot.
 
J

jim e

Legend
Prince Tour 100 (310) Textreme

Tension: 48-58

Pattern: 16×18

Start M's: T

M Skips: 8T & 8H

Length 2 pc.: 20'x19'

Tie off M's: 6T

Start 2 pc X.: 8H

Last 2 pc. X 8T

Tie 2 pc. X: 7H,11T

Blocked hole should be no issues if you prepare for them.
Check search function and you will get a lot of tips for handling any blocked holes.

Note: T = Throat
H = Head
This is USRSA digest pattern. If you varied from this, then I hope it was your racquet.

If you join the USRSA you will get access to every racquet pattern, and can call a technician if you have an issue and they will answer your questions.
Follow the patterns listed in Digest as they get the infor. from Manuf.
 
Last edited:
TimeToPlaySets

TimeToPlaySets

Legend
esgee48 said:
This is the Textreme Tour on TW website. It matches up with the instructions from KlipperUSA. The last mains go from the 'throat' to the tip where you tie off. Post pictures of the frame strung by you.

Dots on the frame indicate that the hole is for a main. No dot means it is for a cross. The arrows probably indicate a tie off spot.
Click to expand...

That is the tour 100T. Different racket.
What is weird that it is also 16x18, yet knots go on different sides of the racket than mine.
My last mains go DOWN to the throat, and are tied off at the bottom/throat.
Soooo weird b/c the math does not add up for two different 16x18 rackets to end at different sides.
That racket must start the strings backwards, but the photo shows that triple grommet in the throat, which is typically a staring position.
 
TimeToPlaySets

TimeToPlaySets

Legend
jim e said:
Prince Tour 100 (310) Textreme

Tension: 48-58

Pattern: 16×18

Start M's: T

M Skips: 8T & 8H

Length 2 pc.: 20'x19'

Tie off M's: 6T

Start 2 pc X.: 8H

Last 2 pc. X 8T

Tie 2 pc. X: 7H,11T

Blocked hole should be no issues if you prepare for them.
Check search function and you will get a lot of tips for handling any blocked holes.

Note: T = Throat
H = Head
This is USRSA digest pattern. If you varied from this, then I hope it was your racquet.

If you join the USRSA you will get access to every racquet pattern, and can call a technician if you have an issue and they will answer your questions.
Follow the patterns listed in Digest as they get the infor. from Manuf.
Click to expand...

This is the racket

Looks like I did everything right, except last cross was tied at 4T, not 11T
No big deal, but I'll do 11T next time.

Thanks for that !
 
Last edited:
J

jim e

Legend
TimeToPlaySets said:
The specs Jim E posted are correct and nowhere to be found.
Click to expand...
The pattern is easily found. I told you that!
Just need to join USRSA. It's a great organization. You get their Digest that has just about every Pattern needed listed. You get it in print and online as well.
The USRSA gives credibility to the craft.
If you string for other players it's wise to be a member. Some posters have said, just look at Pattern of racquet that you get to string before you cut it out. That doesn't always work, as many times a previous stringer strung it different than the proper pattern.Once you string a racquet a few times you know the pattern, but it's nice to have the digest when you get a variety of different racquets to verify a proper pattern.
 
Last edited:
J

jim e

Legend
Besides getting the stringers digest, the USRSA also has a magazine subscription for their members, once in a while some free string samples ,( but lately it has been rare ) ,a racquet stringing technique manual that covers all basics and more of stringing. And especially for @TimeToPlaySets , since he gets confused so easily, he can call them and speak to a technician and get personal help.Also with the digest he would have access to patterns he feels are nowhere to be found.
Like I said earlier , the USRSA gives credibility to the craft.
 
TimeToPlaySets

TimeToPlaySets

Legend
I'm not joining UsraMajor. I only string for myself, so I only need to know how to string my one racket. And thanks to you, I now know.
I forsee that I will not have a single question henceforth. Everything is solved. The entire universe is known.
Unless I change rackets, which I doubt.
 
J

jim e

Legend
TimeToPlaySets said:
I'm not joining UsraMajor. I only string for myself, so I only need to know how to string my one racket.
Click to expand...

As I said, they have a stringing technique manual, that is very complete where you can see if you are stringing by acceptable stringing protocols.That manual would cover most questions for you, and you get subscription to Tennis Industry magazine. Free strings once in a while as well as some discounts.
I join mainly because like I said it gives credibility to the craft.
I know you said you need to only know how to string your own racquet, but do you know how to string it properly?
For someone who tied a knot half way then use an awl to open it up to finish it and then do that for a year, I have doubts that you actually know just what you are doing.I am glad to hear that you only string your own.
 
Last edited:
J

jim e

Legend
Wes said:
Dear God... we can only hope that's true.
Hopefully, you're a man of your word (but I doubt it).
Anyone want to place bets on how long until he asks another question?
If he makes it even 2 weeks, I'll be flabbergasted.
Click to expand...
You are correct Wes.
I would not take any bets on that.
I still don't know if he is that obtuse or has been putting us on all this time.
 
M

Moppet52

Rookie
mad dog1 said:
It’s not an act. He really is that obtuse.
Click to expand...

Honestly, being obtuse is not my issue with OP.

I was really obtuse when I started stringing for myself - had loads of stupid questions, assumptions, and theories. But I watched videos (including listening to the audio), asked the dumb questions, experimented on my own, and always respected those who devoted any time to help me in my quest to be better.

Why I stopped answering OP's questions (and caring about any of the rants, trolls, and/or general idiocy) is that no matter whether replies are sincerely trying to help him (or more recently, remind him of his inability to understand videos have an audio element to them), the OP responds combatively - always looking for a fight. It's exhausting. I already have a 6yr old and 3yr old to raise IRL - and they already know how to interact with other people with more sincere respect and grace.
 
mad dog1

mad dog1

G.O.A.T.
Moppet52 said:
Honestly, being obtuse is not my issue with OP.

I was really obtuse when I started stringing for myself - had loads of stupid questions, assumptions, and theories. But I watched videos (including listening to the audio), asked the dumb questions, experimented on my own, and always respected those who devoted any time to help me in my quest to be better.

Why I stopped answering OP's questions (and caring about any of the rants, trolls, and/or general idiocy) is that no matter whether replies are sincerely trying to help him (or more recently, remind him of his inability to understand videos have an audio element to them), the OP responds combatively - always looking for a fight. It's exhausting. I already have a 6yr old and 3yr old to raise IRL - and they already know how to interact with other people with more sincere respect and grace.
Click to expand...
Those 2 kids must have some good parents! Good job! :)

I wasn’t only referring to his intelligence when I said he was obtuse. I was also including his inability to learn how to interact with respect and civility on the board.
 
Last edited:
TimeToPlaySets

TimeToPlaySets

Legend
Well then, you should close my thread and put me on ignore !
Problem solved, isn't it ?

LMAO, look at MadDog liking Moppets post !!
I can't believe that HIL is still stalking my threads, for years later!!
Addicted !! LMAO!
 
Last edited:
mad dog1

mad dog1

G.O.A.T.
TimeToPlaySets said:
Well then, you should get off my thread and put me on ignore.
Problem solved. I don't need your help, so beat it! Just beat it!
Good luck with your development!

LMAO, look at MadDog liking Moppets post !!
I can't believe that HIL is still stalking my threads, for years later!!
Addicted !! LMAO!
Click to expand...
Please start using more profanity. Really miss your foul, potty filled posts.
 
J

jim e

Legend
mad dog1 said:
I wasn’t only referring to his intelligence when I said he was obtuse. I was also including his inability to learn how to interact with respect and civility on the board.
Click to expand...
You exactly correct. TTPS has criticism of just about anything you comment on. When he asked about a sbs meter and someone suggested an app called racquet tune, tpps said it was garbage, then later called the poster a jackass. TW had to delete his post. He really has no respect, is not appreciative of anyone willing to help. Like you said , no civility. Most posters here are very helpful of anyone with issues, and in return get a satisfaction of a warm thank you . Many of the great posters here I consider friends of mine , as we have a lot in common and can discuss with civility. Unfortunately tpps is different breed.
 
mad dog1

mad dog1

G.O.A.T.
jim e said:
You exactly correct. TTPS has criticism of just about anything you comment on. When he asked about a sbs meter and someone suggested an app called racquet tune, tpps said it was garbage, then later called the poster a jackass. TW had to delete his post. He really has no respect, is not appreciative of anyone willing to help. Like you said , no civility. Most posters here are very helpful of anyone with issues, and in return get a satisfaction of a warm thank you . Many of the great posters here I consider friends of mine , as we have a lot in common and can discuss with civility. Unfortunately tpps is different breed.
Click to expand...
The sad part is animals can be trained to behave. TTPS is a human being and humans are supposedly more intelligent when it comes to learning than animals. Perhaps TTPS isn’t human. I believe he might be a robot with a bad operating system.
 
TimeToPlaySets

TimeToPlaySets

Legend
jim e said:
You exactly correct. TTPS has criticism of just about anything you comment on. When he asked about a sbs meter and someone suggested an app called racquet tune, tpps said it was garbage, then later called the poster a jackass. TW had to delete his post. He really has no respect, is not appreciative of anyone willing to help. Like you said , no civility. Most posters here are very helpful of anyone with issues, and in return get a satisfaction of a warm thank you . Many of the great posters here I consider friends of mine , as we have a lot in common and can discuss with civility. Unfortunately tpps is different breed.
Click to expand...

Yes, racket tune is garbage.
It does not work on Android.
I should ask for a refund.
 
You must log in or register to reply here.

Similar threads

P
Do manufacturers hate stringers?
Replies
49
Views
2K
1HBHfanatic
1HBHfanatic
S
tying off on wrong hole
Replies
7
Views
645
1HBHfanatic
1HBHfanatic
Irvin
Never noticed this before
Replies
19
Views
4K
fortun8son
fortun8son
alexmcnab
Patterns for Yonex vcore tour g 330
Replies
6
Views
2K
alexmcnab
alexmcnab
R
Did TW made a mistake stringing my racket?
Replies
7
Views
2K
rufusbgood
R
Top