Imago
Hall of Fame
Hopefully, they will change it now that the secret is out...big secrets lol...new PJ
Hopefully, they will change it now that the secret is out...big secrets lol...new PJ
Just an idea, but that wider section of the grommet adds a little weight and gives you a little higher TW putting a little more mass behind the ball.Any ideas why the 18M grommets look so weird with the extra piece at the end?
That being the case why doesn't any pro play with one? Will be nice to see if any pros play with the new versions.The biggest mistake one can make, is to think that the Tfight DC or Dynacore are even remotely on the same level as the LTD's
I actually believe that JANKO AND VERDASCO at one point played with this mold. I have a janko personal model and it has all the same characteristics as the 16m ltd. I don't think he plays with it anymore tho I actually think he did make a change to a newer frame and as we know verdasco has changed more than most racquetaholics here. Haha.That being the case why doesn't any pro play with one? Will be nice to see if any pros play with the new versions.
As far as the pallet is concerned the Limiteds still have foam pallets they are just two piece instead of one piece and you could put a TK82 or TK82S pallet on your 300 if you wanted to. The big difference between the Limiteds and the other frames is the frame stiffness. To each his own but I prefer the DC over the Dynacore and the Ltd would be my third choice. But I'm sure you and many others would not agree.
EDIT: I agree that all three are a little different but I doubt you'll get everyone to agree any one is better than the other two.
You're correct but no one plays with it now.I actually believe that JANKO AND VERDASCO at one point played with this mold. I have a janko personal model and it has all the same characteristics as the 16m ltd. I don't think he plays with it anymore tho I actually think he did make a change to a newer frame and as we know verdasco has changed more than most racquetaholics here. Haha.
I know I thought for a while bedene was too but maybe not. All I know is the RA lets me play longer than other frames.You're correct but no one plays with it now.
That being the case why doesn't any pro play with one?
I think you will see a higher SW in the newer Limited frames, but I've been wrong before.I wonder really whether Tec will change something in this regard with the next Ltd.
Many people like a more flexible frame, nothing wrong with that. I bet all manufacturers would like to find 1 frame everyone loved.I know I thought for a while bedene was too but maybe not. All I know is the RA lets me play longer than other frames.
I think you will see a higher SW in the newer Limited frames, but I've been wrong before.
Many people like a more flexible frame, nothing wrong with that. I bet all manufacturers would like to find 1 frame everyone loved.
You have a broken string. I can fix that for you. LOL I'm just curious, your signature says 315 Ltd 18x20 but all your rackets have 16 mains. How do you like the racket that looks like a 315 DC compared to the Limited frames? Judging from the pattern and the grip that is not a 315 DC frame is it? Can you tell me more?
Judging from the floor, rug, and the tie off knot at 6T, that racket looks very much like the pictures of the prototype posted back on page 56.
So that's it.....
Intredasting....
Hopefully Tecnifibre make it available in Australia this time and don't go full '**** like last time
True I just assumed they were his and noticed the racket in the center did not have the Limited paint job and looked like a 315 DC but it wasn't. When plagiarizing someone else's work it is common to quote a reference so others won't be confused. I don't remember seeing those pics before but they are there on pages 55-56.I don't think @AllCourtHeathen was claiming the racquets as his own.... merely re posting the pics from earlier for all to see
Tecnifibre Aus does not sell tennis only squash.Tecnifibre Australia at this point in time have heard nothing about the tfight ltd for June. However they do say there will be a new t flash at that time? Anyone heard that?
Filip did play with the Limited but switched to the 305.Filip Peliwo changed his racket recently? Last time I checked his mold looks different from the ltd 315. Peliwo's looked like a thicker frame from the T-Fight ATP line up before the DC line. Paint on his racket says 305.
Tecnifibre Aus does not sell tennis only squash.
Filip did play with the Limited but switched to the 305.
http://www.**********.net/news/gear/2013/12/30/me-and-my-racket-filip-peliwo
He is now using the 305 w/Razor Code @48#That post is from December 30, 2013. If you check his twitter account tweets the pictures are 315 Ltd 18m in 2015 in mid July. Early July he was using a T-fight 305 ATP and then a 305 DC. Then he changed to a Ltd 315. I haven't seen any pictures of his more recent matches that show what he is using this year.
Tecnifibre Aus does not sell tennis only squash.
Filip did play with the Limited but switched to the 305.
http://www.**********.net/news/gear/2013/12/30/me-and-my-racket-filip-peliwo
No problem it happens. You have actually been a fantastic source for tecnifibre information.^^I though I seen there site where they only had squash. Looks like I'm wrong again.
He is welcome to join this thread then... he may even have more ltds then @JohnBPittsburgh but I doubt it haha.Guys, I can confirm that Peliwo plays with the Ltd - I even have his specs. He made the switch during the Davis Cup match-up vs Belgium.
I find my 16m with a gut/poly hybrid to have decent power but nothing over the top. I am able to step in and swing right through the ball and keep it in which is what has made me like this frame so much.Started to like 16M but seems that power is in excess with NG and poly. Also got 50 strange OGs from China with a square PU strip underneath - no more vibrations at all.
He is welcome to join this thread then... he may even have more ltds then @JohnBPittsburgh but I doubt it haha.
Not sure tbh, I just left it in the hands of a racquet whisperer to string LOL it is a tad firm right now, but I actually like it, awesome control and not a scintilla of arm pain, though it will settle in to a "mature" tension soon as it loosens up obviously, so we will see then. It may launch a little more then. I hope not.I strung my 18m with gut poly around 56/50 and it felt amazing What tension did you string yours?
I find my 16m with a gut/poly hybrid to have decent power but nothing over the top. I am able to step in and swing right through the ball and keep it in which is what has made me like this frame so much.
How do you find those overgrips? Do you lose any feel for the bevels? Do your fingers lock into the grooves?
I strung my 18m with gut poly around 56/50 and it felt amazing What tension did you string yours?
Just out of curiosity I went to Filip Peliwo's facebook page and asked him what racket he used and if he would mind sharing his specs. Here is his response:
"Tecnifibre t-fight 315 limited. It's an older frame. 326g 31.2 balance 293 swing weight
Think it's an 18/20
And a 98 or 97 head
98 I think
Grip 4 3/8"
EDIT: I am assuming those specs are unstrung specs. Assuming String will add about 18 g, SW will go up about 37 pts, and balance goes up 1.2 cm. That means his strung specs are about:
SW = 330
RW = 157.4
Weight = 344 g
Balance = 32.4 cm
MgR/I = 21.1