Prince Beast O3 98 Stringing Instructions

[Lukhas]

Hello,

I cannot find stringing instructions regarding the Prince Beast O3 98; especially regarding stringing it one piece; potentially using the Around The World (ATW) method. Considering it has an asymmetric grommet design, I suspect it could have a long side and a short side. Alas, I cannot find informations on Prince's website or on the forum. TWE doesn't even plan to stock grommets for the racquets, and the boomerang tools they stock all seem to be for bigger headsizes than 98in².

Thanks in advance.

 

[TW Staff]

Lukhas,

Hope this helps:

1pc-ATW
Start Mains @throat
Mains Skip: 7T,9T,7H,9H
Tie-offs: 6H, 8T, 6T

Long side is on side that lists "Start Knot" @H.
Alternate main installation, no more than 2 per side. Tie-off short side mains @8T.
After installing the 7th main on long side install top cross @7H. Complete crosses, making sure to lock your base while pulling crosses on top-half of O-ports. (Top-half = all crosses above 3/9 axis).
After installing bottom cross @7T, install final main on long side, tie off @6H.

Thanks,
Brittany, TW

 

[Lukhas]

Lukhas,

Hope this helps:

1pc-ATW
Start Mains @throat
Mains Skip: 7T,9T,7H,9H
Tie-offs: 6H, 8T, 6T

Long side is on side that lists "Start Knot" @H.
Alternate main installation, no more than 2 per side. Tie-off short side mains @8T.
After installing the 7th main on long side install top cross @7H. Complete crosses, making sure to lock your base while pulling crosses on top-half of O-ports. (Top-half = all crosses above 3/9 axis).
After installing bottom cross @7T, install final main on long side, tie off @6H.

Thanks,
Brittany, TW

Amazing answer, thank you very much. I didn't even expect that much care and detail!

 

[esgee48]

What TW provided is what I call a universal ATW. Their instructions will work for all frames that have mains tying off at the throat. Just be aware that if you have an even number of crosses, you start with the 1st cross. If you have an odd number, you start with the 2nd cross. Weave down to last cross, go up with last main, do 1st cross, then tie off.

 

[Lukhas]

What TW provided is what I call a universal ATW. Their instructions will work for all frames that have mains tying off at the throat. Just be aware that if you have an even number of crosses, you start with the 1st cross. If you have an odd number, you start with the 2nd cross. Weave down to last cross, go up with last main, do 1st cross, then tie off.

Thanks for the additional instructions. It doesn't look like I'll need a starting clamp for this pattern too; I do have a starting clamp, but that's a nice bonus.