Where can I find the staple gun and staples for butt cap installation

[2ndServe]

I actually tried one with a wider stable but I can’t seem find the ones they use for tennis butt caps

 

[Permitlady]

gave up on the quest. used double sided tape and the grip didn't slide one bit

 

[Soundbyte]

ROBERTS 10-600 3/16" Crown, 120V, 15-Amp, 20 Gauge Electric Stapler with Carrying Case, Red https://a.co/d/d0MWkMa

This was recommended by AM Stringing from the legendary Albert Lee

 

[Arjuntino]

I actually tried one with a wider stable but I can’t seem find the ones they use for tennis butt caps

I just drill. A hole in the buttcap and use the existing staple holes. Then wrap some electrical tape to hold it in place.

 

[tele]

i used superglue. seems to have done the trick

 

[Pctopcool]

Arrow T50 Heavy Duty Staple Gun works surprisingly well for me.

 

[frank52]

You can damage the racquet when stapling. I use contact cement with good results.

 

[Soundbyte]

You can damage the racquet when stapling. I use contact cement with good results.

You can damage the frame when stringing too. Using the proper tools you're not going to damage the frame. The standard is stapling. That's what any MRT would do.

 

[Humbi_HTX]

I drill with very thin bits enough to work as a guide without bending the staple and carefully hammer it down.