Closest Modern day equivalent to Djokovic racket

djoko4thewin

Professional
right, i think the lm radical or the youtek rad mp with lead comes closer. the ones you guys said dont match sw, beam, or head size well especially the pro kennex which is 93.
 

dincuss

Hall of Fame
right, i think the lm radical or the youtek rad mp with lead comes closer. the ones you guys said dont match sw, beam, or head size well especially the pro kennex which is 93.

I said look at the MidPlus
(Scroll Down on the TW page)
 

djoko4thewin

Professional
it's hard for me to demo the prokennex as it isnt sold everywhere in the UK. seems like it's not very popular or something. which is the next best? the lm radical or youtek rad mp?
 

dincuss

Hall of Fame
LM Rad, but of course it will need lead, and the flex is going to be an issue. Djokovic probably requested a personal flex pattern.
 

PED

Legend
Have you demo'ed the youtek? You might want to give a try before buying as it's a much less crisper feel than your Wilson. I think the 51 flex is the thing that would be hard to duplicate. I've seen posts on here before from people who have tried Berdych's Dunlop which has a similar low flex rating and many didn't care for the feel at all-it would be quite low powered for one thing. I understand your desire to get something similar to Novak's but remember that a 371 SW can be used effectively by very few people. :)
 

djoko4thewin

Professional
ok so would you suggest a different racket to be closer to djokos with more crisp. or if this youtek was nice, then what lead setup would u recommend?
 

PED

Legend
Regarding the lead, you just need to experiment and see what you feel comfortable with. After playing around with setups for the last two years, I like an SW of 329 because it can put some hurt on the ball and I can still really whip it through the strike zone. There really is no right or wrong answer to setup. The guy who hits the heaviest ball I know and was a former top 10 junior plays with a stick with an sw of 307-it's all about racquet head speed.
 

djoko4thewin

Professional
ok thanks vs babolat. if i know the sw and mass of the rad mp already from tw then would you know how much would need to go where to get the specs of djokovic.(360gr 371sw)
 

djoko4thewin

Professional
Use the TW University Customization tool. It will tell where and how much weight to add.
http://twu.tennis-warehouse.com/learning_center/customization.html

great help, thanks. it's 48gr at 16.1inches on racket to match but i'm not sure about the balance, the youtek is 2pts head light so i'm not sure what i want at end, it comes out with 3.89inch balance.

jeez that's alot of lead. like 48inch worth if babolat tape as it's 1inch per gram so 24inch on each side of 16.1inch up racket. so like 4 layers of 4inch tape on each side of racket at 16.1inches...wow that's alot no?
 
Last edited:

djoko4thewin

Professional
one thing, anyone know what djokovic's balance would be? apparently 32 balance but what is youteks?
 
Last edited:

dincuss

Hall of Fame
I did all the math in the racquet customizer,
and it came out

If you put 48 grams at locations 8'oclock and 4 'oclock it would match it fairly close.
 

travlerajm

Talk Tennis Guru
If you add the lead at 4 and 8, it won't play anything like Djokovic's frame. You want all the lead in the upper half of the hoop to get the right feel.

Your best bet is the POG LB, cut down to 27". It is light enough in the head and in the handle to allow you to match any pro setup. And it's quite flexible.
 

djoko4thewin

Professional
I did all the math in the racquet customizer,
and it came out

If you put 48 grams at locations 8'oclock and 4 'oclock it would match it fairly close.

Thanks alot. but other don't agree lol, so exactly where on the racket and how much, like 24gr on 8 and 24 on 4? like how much inches length you think and where on the racket like how far up, when i did it it said 16.1inch up,

SO with babolat tape it's 4 layers of 4 inch tape at 8 and 4 oclock(16.1inch up)(checked it from ur calculations). so do u think that would affect the racket in a bad way? and or is 4inch length too small?.

If you add the lead at 4 and 8, it won't play anything like Djokovic's frame. You want all the lead in the upper half of the hoop to get the right feel.

Your best bet is the POG LB, cut down to 27". It is light enough in the head and in the handle to allow you to match any pro setup. And it's quite flexible.

sorry if im stupid, but what is POG LB? a prince? racket but noone has said this one before as a option and to cut it down doesn't sound easy.

whoo..thats alot of lead.

have fun with it, regardless (ouch!)

lol, yeah do u think that if you can handle that sorta lead then it's fine or would the racket not function how it should with so much lead lol.
 
Last edited:

djoko4thewin

Professional
oh also, he uses a leather grip, should i go for a leather(which type?) then add lead so i dont have to add as much lead.
 

dincuss

Hall of Fame
The new Head leather tour is one of my favorites. not too thick, not too thin, not too tacky and very firm.

But Ive heard nothing but great stuff about the TW leather.
 

djoko4thewin

Professional
right, how much does the head leather one weigh, because that would change the weight of it completly and with 1 overgrip on, so the lead arrangement would be different.
 

djoko4thewin

Professional
nole_madrid09_3_11.jpg
 

djoko4thewin

Professional
bump. thx dincuss for your help. iv demoed the yt rad mp and it is quite good but the weight is a serious issue although it is fairly stable considering. i will ask around for the prokennex heritage type c redondo to see if i can get my hands on one and tbh that is the most nearest to djokos and as u said it only needs some lead in the head so not much customization needs to be done. if so how much lead in the head? thanks.
 

djoko4thewin

Professional
so please some help!!....if redondo then how much lead in the head? obivously not much as it's like 343g strung....

OR yt rad mp with head leather, so 8-10gr more so 320gr strung, so then 40gr to add but the balance would change so how do i know where to add lead??

Thanks!!
 

dincuss

Hall of Fame
so please some help!!....if redondo then how much lead in the head? obivously not much as it's like 343g strung....

OR yt rad mp with head leather, so 8-10gr more so 320gr strung, so then 40gr to add but the balance would change so how do i know where to add lead??

Thanks!!

One sec let me calculate :D
 

djoko4thewin

Professional
17grams on the top half of the hoop about

so about 17 grams from 10oclock to 2oclock

Thanks dude!! that's the prokennex weight sorted but i won't use the leather...i use a overgrip on it like on my KBT and like djoko so weight will differ so i guess it'll be like 12gr on the hoop??

but for the YOUTEK rad MP which is more likely by the way as i said im struggling to get hold of one.

SO...if head leather on rad mp and one overgrip will the weight be similiar? im rly confused please help me calculate weight and balance from there. Thanks.

prestige might be as heavy but the head it way smaller so its not gonna feel the same.

yeah true but i could try the prestige MP which would be similiar, basically wait for that as its the same but just more weight...or customize the rad mp myself.
 
Last edited:

dincuss

Hall of Fame
Thanks dude!! that's the prokennex weight sorted but i won't use the leather...i use a overgrip on it like on my KBT and like djoko so weight will differ so i guess it'll be like 12gr on the hoop??

but for the YOUTEK rad MP which is more likely by the way as i said im struggling to get hold of one.

SO...if head leather on rad mp and one overgrip will the weight be similiar? im rly confused please help me calculate weight and balance from there. Thanks.

No problem,
But actually I think thats with a normal synthetic, since the PK Redondo doesnt come with leather, even though its shown in the picture.
 

djoko4thewin

Professional
No problem,
But actually I think thats with a normal synthetic, since the PK Redondo doesnt come with leather, even though its shown in the picture.

OH, ok thanks, well i prefer a leather then 1 overgrip as i know the right gripsize for that and synthetic can be different thickness. but anyhow if the yt had head leather as i said then that would be like 315gr strung weight so 45gr to go. so would the balance be the same as before? 6 and 4 oclock or>?
 

djoko4thewin

Professional
help please...also whats the K95 like compared to these? plus the pic on the last page shows djokos racket with a code in the inside of the throat can that help us find what is acctually under the PJ?
 

djoko4thewin

Professional
but anyhow if the yt had head leather as i said then that would be like 315gr strung weight so 45gr to go. so would the balance be the same as before? 6 and 4 oclock or>?

also whats the K95 like compared to these? plus the pic on the last page shows djokos racket with a code in the inside of the throat can that help us find what is acctually under the PJ?
 

vsbabolat

G.O.A.T.
but anyhow if the yt had head leather as i said then that would be like 315gr strung weight so 45gr to go. so would the balance be the same as before? 6 and 4 oclock or>?

also whats the K95 like compared to these? plus the pic on the last page shows djokos racket with a code in the inside of the throat can that help us find what is acctually under the PJ?

This Photo?

It says "Novak" inside the throat.
 
Top