Gamma Tech

Gamma Tech

Professional 48 From Pittsburgh, PA
Joined
Last seen
Messages
914
Reaction score
100

Profile posts Latest activity Postings About

  • tacotanium
    @Gamma Tech - Hi Gamma, Can you provide a list or brochure or link showing all the base clamp models you current have for your stringing machines?
    Gamma Tech
    Gamma Tech
    I don't have anything like that available unfortunately, but you can contact support@gammasports.com for information on all of our current products.
    tacotanium
    tacotanium
    I'm also trying on that too but communication is pretty slow since I have nothing to look at and don't know what's out there.

    Is there any way you can make a list of all base clamp models and add few biggest features for each? Also pricing will help too.

    Thanks!
    C
    @Gamma Tech I have a 6500ELS and the tension adjustment knob is stuck very tight. Upon removing the cover, I noticed there is a long threaded screw attached to the tension knob with a plate on it and a spring with a hex screw at the end. Despite using WD40 around the plate, I have had no luck in getting the threaded rod to turn through it. Can you help me rectify the issue?
    Gamma Tech
    Gamma Tech
    Hi there, if the threads are seized it means that something on there is stripped, and because the 6500 is about a 20 year old machine I no longer have parts to replace those unfortunately. You'll probably be best off with a new stringer.
    C
    Carson
    Thanks for your reply Bret.
    C
    @Gamma Tech
    I'm the proud new owner of a not-so-new Gamma 6500 ELS. Can you help me understand what I should expect from the 2/10 and 7/4 o'clock mounting points? One side hits the side of the racket before the other and when I tighten it up to get firm contact on both sides, I feel like I'm overtightening on the side that hits first. Is that a danger? Am I doing something wrong?
    C
    ChadW
    Also, is there anything you'd recommend I check out as to why the string measuring mechanism doesn't work?
    derick232
    Hello @Gamma Tech, I was wondering about the possibility of buying some specific parts of a 602 FC turntable. I have the floating clamp version and would like to get the fixed clamps. From what I can tell, the FC just has the two side mounted aluminum extrusions mounted to the center portion. Is it possible to purchase just those pieces and the clamps?
    Gamma Tech
    Gamma Tech
    Unfortunatley it is not, those are not parts we offer. Sorry about that!
    H
    Hello. I am considering a friend's 8500. Its in great shape but I am curious if parts, especially electronics, are still available if needed. When was this model discontinued? Any idea what they are worth in 2021?
    Gamma Tech
    Gamma Tech
    I don't know exacty when they were discontinued, but I would say sometime in the early 2000s. Parts for these machines are very limited, I do have some elctronics but again, not much. Depending on the shape of the machine I would say they're probably not worth much considering how far machines have come since that was in production.
    H
    HeadRad
    Thanks
    D
    Hello Gamma Tech

    I owned a Gamma 6900 ELS (6pts) for quite some times now and was wondering if there is any gravity-release clamp bases options out there for that machine that you could recommend? Thanks for any info you could provide.

    D
    Gamma Tech
    Gamma Tech
    That depends on your tuntable, our gravity release clamps will only fit on our newest iterations with curved base clamp rails.
    S
    Hi Gamma Tech,
    I am considering driving an hour to look at a Gamma Es 6200 for sale that is supposed to be in "excellent". The asking price is $250 and I think that's about a 20 year old machine. Could you please offer your advice on what I should check out and whether that's a fair price?
    Thanks a bunch. -stickM
    N
    When did this model come out gamma 8800. Might be buying a used one in Canada. Shipping and duty is expensive. What do you say what this machine is equal to the current gamma machine at that price point. Any problems or anything I should watch for when checking out this machine. Ty.
    Is there a way I can see how many racquets or pulls this machine has strung? Do you still have clamps and parts for this machine ???
    djNEiGht
    Ewan

    I just sold my 602 looking to purchase either the ELS/xELS but it is out of stock. I was told by a vendor middle of October & Gamma CS said November. Eager to know when it's in stock. I have access to a crank machine but still looking forward to getting the new one for myself.
    Also, do you have the base dimensions for this machine? primarily width/length at the feet of the machine.

    Thank you
    S
    dont know if you saw the recent thread about string slipping into the gap on the dropweight. members suggested I contact you directly. any thoughts, workarounds, upgraded parts with a groove, etc?
    MRfStop
    Hello,
    I posted a thread and was referred to ask you for help.
    I have a 5003 stringer and the spring inside the part that locks the clamp in place broke.
    Are there replacement springs? Or do I need to replace the clamp? Where would I get new clamps from?
    tennisaddict03
    Hello sir, I recently acquired a Gamma 6900 stringing machine and I am loving the machine. I found that the owner had lost one of the clamp sleeves, which is the black rubber part to make the clamps a bit more comfortable and provide some tactile grip. Is there a way I can go about ordering this? I would appreciate any help or direction that you can give me. Thank you.
    G
    Hi Brett, i have a Gamma 5003 6pt mount stringer (have had for many years). One of the A220 mounting stands has cracked straight through right where securing bolt is. Is there anywhere to purchase a replacement mounting stand (or stands)? Thanks in advance.
    P
    I have a Gamma 6500 ELS. One clamp is starting to slip and there is more snapback movement of the clamp after pulling at tension. Do you have any suggestions to resolve these issues? Are they any meaningful upgrades that I can do besides getting the new Universal Fixed Clamps? Do you have any procedures regarding routine maintenance and lubrication? Thank you for your support. I greatly appreciate it.
    D
    Hi.
    I have a gamma stringing machine and somehow in our move I lost one of the supports on the racquet head mount. I have contacted gamma twice but they never got back to me after saying they would. I would certainly by all four if that is an option just to get the stringer working again. Thanks again for any help.



    https://denvertennisclub.gotennissource.com/page.lasso?p=captain_page
    J
    jdp72
    If you are still looking to buy some of those racquet head mounts let me know...I could sell you a set.
    jelichek
    Hi. My 13 year old Gamma X-Es has developed a problem. The knob that adjusts the tension has become quite hard to turn. It takes quite the effort if I want to say go about 5 lbs. in either direction. This has just happened in the last month or so. I sprayed a little WD 40 around there but it did nothing to help. Any ideas as to what this may be? Thanks!
    B
    Hey GammaTech. Am looking into the stand for the X-2. Would you have dimensions, both how it's shipped and when it's in use? I assume there is some assembly, but there is little information out there. Thanks.
    M
    My X-6FC needs parts. 1 of the frame support slide knobs (#270 in X-6FC manual) came off of the bolt. It's the plastic knob version. Can this be replaced? I recently found a small pin down in the tray of my stringer. It's from the clamp. When the clamp handle moves, there's a little roller so it's a smooth motion. The pin is the little axle for that roller, but the roller is gone. Can this be replaced? Thx
    buckeye_man18
    Do you have any suggestions on what to do with the Gamma X-6FC in a situation where a table brake is needed or preferred (such as dealing with O-ports). I have tried wedging my body against the racquet but that did not work well. Thank you!
    C
    Hey there!! I bought a 5800 ELS a couple years ago, and so far it has been awesome. But it's the non-SC version. Is it at all possible to upgrade my towers only to the SC ones?
    WhETHANs
    I have been using a gamma x2 stringer for a while and up to a few months ago my cross strings have been shotty and loose lately. I posted a new thread about it in the stringing techniques category. basically I believe that the stringer is not tensioning the previous cross for some reason. I have read too straighten the crosses as you go too but that doesn't seem to be my main problem. Any advice?
    S
    Hi I am an owner of a Gamma X-stringer X-ES stringer. I just found that one support lock knob (part # 144 as listed at page 17 & 18 of the user manual for Gamma X-stringer X-ES stringer. Could you please advise how I could get a replacment part? Supposedly there are 4 but I only find 3 of them. Thanks,

    Allen (SJtennis)
    I
    Hi Bret,
    Could you tell me some more about the Gamma Stringing machine 5800 ELS for details such as warranty and servicing in Europe?
    I am based in Ireland.
    Thanks,
    Phil.
  • Loading…
  • Loading…
  • Loading…
Top