The Official Angell Users Club

I have two TC95 and two TC97, both in 16x19 and 18x20. They all play very similar, the major difference is that TC95 vibrate when you hit outside the sweetspot, TC97 are rock solid. TC95 have ping sound without dampener, TC97 no ping sound at all. All string with the same string, RS Lyon 1.20.
With TC95 I get very little vibration, even when I miss the sweetspot but I string at 45lbs with RSlyon 1.25(1 piece in 16x19 pattern) I can play just fine without a dampener with it and only use the most minimal of rubber bands (a #33). No pings for me and my strings probably settle around 39lbs after stringing and a couple of hours of hitting.
 

NYJet24

New User
I've been waiting to order a couple for days now but Paul has been terrible at response time to my questions. I asked a couple questions last Wednesday and he didn't get back until Monday. I immediately asked one more simple follow-up question and am still waiting for a reply.


so you guys are saying the swingweights will vary and won't be the same? what if I put in the notes when I order what my desired swingweight will be?

Is the swingweight listed on TW for rackets strung or unstrung?
 
I've been waiting to order a couple for days now but Paul has been terrible at response time to my questions. I asked a couple questions last Wednesday and he didn't get back until Monday. I immediately asked one more simple follow-up question and am still waiting for a reply.


so you guys are saying the swingweights will vary and won't be the same? what if I put in the notes when I order what my desired swingweight will be?

Is the swingweight listed on TW for rackets strung or unstrung?
He will get back to you... its just not always immediately since he gives personal response. It is a small shop and you are getting personal attention from a top expert/designer. I wouldnt be surprised if he's extra busy just before Wimbledon which is a big racquet sales time and inventory etc is crucial.

Yes swingweights can vary but if you ask for a match Im certain he'd do that and note it in his records for the future too.

TW swingweights are strung I believe? Note, poly strings are somewhat heavier
 

NYJet24

New User
He will get back to you... its just not always immediately since he gives personal response. It is a small shop and you are getting personal attention from a top expert/designer.

Yes swingweights can vary but if you ask for a match Im certain he'd do that and note it in his records for the future too.

TW swingweights are strung I believe? Note, poly strings are somewhat heavier

If I order two at the same time they'll be the same though, right? What if 2 years from now I want to buy another, how do I ensure it's the same as my current ones?
 
I've been waiting to order a couple for days now but Paul has been terrible at response time to my questions. I asked a couple questions last Wednesday and he didn't get back until Monday. I immediately asked one more simple follow-up question and am still waiting for a reply.


so you guys are saying the swingweights will vary and won't be the same? what if I put in the notes when I order what my desired swingweight will be?

Is the swingweight listed on TW for rackets strung or unstrung?

That's surprising. He's been pretty good answering my emails. Maybe he's busy fulfilling backlogged orders.

He told me for my config the unstrung SW will be 295 to 305. After stringing, I think the minimum will be 322. This is for 320g(11.4oz) / 310mm(10ptsHL) on a TC97 16X19

You can give him your desired SW and he may be able to get close, if not exact. I prefer to start off with lower SW, so I can add lead to get it up to my liking.
 

tribesmen

Professional
How would you compare the power in 16x19 version for both?

Did you try a multi string?

I am sorry for asking so many question. It's going to be my first experience with an Angell.
Unfortunately not playing with multi for years, regarding power, I had a feeling that TC95 give me more power, but my tennis buddies told me there was not any difference. The feel of TC95 is unmatched, really great, but overall I prefer TC97 and find it more versatile and more forgiving, but that's just me, we're all different.
 

tribesmen

Professional
With TC95 I get very little vibration, even when I miss the sweetspot but I string at 45lbs with RSlyon 1.25(1 piece in 16x19 pattern) I can play just fine without a dampener with it and only use the most minimal of rubber bands (a #33). No pings for me and my strings probably settle around 39lbs after stringing and a couple of hours of hitting.
Your decision to string it so low is probably right and correct for this guy. My preference is to have around 22-24 kg cca. 50 lbs, but it seems TC95 is more at-home with lower tensions.
 

krikamons

Rookie
just for arguments sake... not to tell you anything you dont already know but it really is worth it to get used to a heavier more hl stick... unless sw really is the problem... but i wonder if some on these boards are over concerned with sw #'s. Myself its the balance point that matters more as long as it is over 12.4oz strung. 9pts hl for me

my two tc95s... 1st bought used, the other from Paul play identically except for the B and A grip shape

just for arguments sake... not to tell you anything you dont already know but it really is worth it to get used to a heavier more hl stick... unless sw really is the problem... but i wonder if some on these boards are over concerned with sw #'s. Myself its the balance point that matters more as long as it is over 12.4oz strung. 9pts hl for me

my two tc95s... 1st bought used, the other from Paul play identically except for the B and A grip shape


Don't really the science behind this. Just struggling to generate enough (effortless) head speed. And if I do I get pain in my wrist pretty soon.
 

scf

Semi-Pro
Don't really the science behind this. Just struggling to generate enough (effortless) head speed. And if I do I get pain in my wrist pretty soon.
I came to TC100 from Pro Drive/Pure Aero. Despite of higher static weight (320 vs 300) TC100 is easier to swing. TC100 has 285 SW and 308mm balance unstrung.
 

krikamons

Rookie
I came to TC100 from Pro Drive/Pure Aero. Despite of higher static weight (320 vs 300) TC100 is easier to swing. TC100 has 285 SW and 308mm balance unstrung.

my reference point is volkl sg v1 pro - had that playstation ease of use
keep scratching my head about the 'use the heaviest racket you can handle' mantra. feel that more emphasis should be put on what "can handle" means :)
 
J

joohan

Guest
my reference point is volkl sg v1 pro - had that playstation ease of use
keep scratching my head about the 'use the heaviest racket you can handle' mantra. feel that more emphasis should be put on what "can handle" means :)

Can handle - I am able/willing to admit. My case, anyway.
 

topspn

Legend
my reference point is volkl sg v1 pro - had that playstation ease of use
keep scratching my head about the 'use the heaviest racket you can handle' mantra. feel that more emphasis should be put on what "can handle" means :)
Very subjective for each person depending on their mechanics and physical conditioning.
 

zalive

Hall of Fame
my reference point is volkl sg v1 pro - had that playstation ease of use
keep scratching my head about the 'use the heaviest racket you can handle' mantra. feel that more emphasis should be put on what "can handle" means :)

Very subjective for each person depending on their mechanics and physical conditioning.

Because it's what 'you can handle', therefore subjective by definition.

But even what 'you can handle' is pretty relative. Currently one of the racquets I play with is i.Prestige weighted to 372 grams (321 mm balance). I'd say this one is somewhere on my upper limit of what I can handle. But the truth is...I could handle it better. So the alternative is either to go down 15-20 grams to the usuall weight ballpark, or to force myself to use my core more on each stroke...in which case I handle it well. So, what I handle is stretchy, as I can advance my technique and handle more even without any change in physical strength. Core is quite strong anyway.
 

dgoran

Hall of Fame
I have two TC95 and two TC97, both in 16x19 and 18x20. They all play very similar, the major difference is that TC95 vibrate when you hit outside the sweetspot, TC97 are rock solid. TC95 have ping sound without dampener, TC97 no ping sound at all. All string with the same string, RS Lyon 1.20.

Funny for me the exact opposite was true tc97 was pingy and tc95 felt buttery smooth. I think this is very string dependent and or specs. My sw was higher on tc95 than tc97.
 
Don't really the science behind this. Just struggling to generate enough (effortless) head speed. And if I do I get pain in my wrist pretty soon.
The science is pretty solid... Im a big returner and therefore I benefit from a stick set up to deliver on returns with mass and stability so anything over 12.5 oz at about 9pts hl works. In general I set up my sticks to have good stick on any 1st or second serve that is struck well with a good toss (like pretty much every player if my serve goes off it is the toss that is the culprit) as well as reliable on returns. Big returners usually have pretty hefty setups that still ar maneuverable. I really have never had problems generating RHS... I used to play with 13oz+ wood sticks when I was learning the game. I still cant believe how cleanly pros could hit with a standard sized head back in the 60's and 70's.

Your decision to string it so low is probably right and correct for this guy. My preference is to have around 22-24 kg cca. 50 lbs, but it seems TC95 is more at-home with lower tensions.

Yes the Tc95 seems to like a control oriented full poly string job at lower tensions... it enhances its prodigious spin
 
Last edited:

Georgo

New User
The science is pretty solid... Im a big returner and therefore I benefit from a stick set up to deliver on returns with mass and stability so anything over 12.5 oz at about 9pts hl works. In general I set up my sticks to have good stick on any 1st or second serve that is struck well with a good toss (like pretty much every player if my serve goes off it is the toss that is the culprit) as well as reliable on returns. Big returners usually have pretty hefty setups that still ar maneuverable. I really have never had problems generating RHS... I used to play with 13oz+ wood sticks when I was learning the game. I still cant believe how cleanly pros could hit with a standard sized head back in the 60's and 70's.

Yes the Tc95 seems to like a control oriented full poly string job at lower tensions... it enhances its prodigious spin

I am fascinated right by the opposite, how well it plays at 25KG (55lbs) or even 26KG (57lbs) while remaining totally arm friendly with a poly.
 
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you
 

Gee

Hall of Fame
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you
Condolences with the loss of your father, BC. I wish you all strength these sad days.
 

Automatix

Legend
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you
Sincere condolences.
 

zalive

Hall of Fame
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you

We're all just passengers here, and I truly believe in existence of Spirit and in longevity of our souls, far beyond our earthly episodes here. And that what's live cannot die, as much as what's not cannot be. So life is eternal and existence is eternal, and your father is very much alive even if he's no longer on this map . However, we do miss and we will miss our dearest as we do like having them here, as long as we are here. But this episode is timed, for them and for us. My condolences BC.
 
Condolences with the loss of your father, BC. I wish you all strength these sad days.
Thanks all, I dont want to derail things here... I was able to hit around yesterday a bit and I felt better. Tennis is good for that, just concentrating on the feeling of hitting the ball well. It is a game of inherent immediacy that also builds memories.
 
Last edited:
J

joohan

Guest
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you

My heart is with you. I've just got wasted with my dad watching under 21 year old football(soccer) Euro championships after a serve practice with my TC100. The frame is a bliss but having my dad patiently waiting for me and listening to my superior (soccer related) intelligence while drinking rum with a beer back...that's irreplaceable. You're never an adult until you lose your parents...as they say...
 
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you

You are among the best contributors to this forum and I am truly sorry for your loss. Process here all you like/need. Best, BHBH


Sent from my iPhone using Tapatalk Pro
 

prjacobs

Hall of Fame
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you

My dad was the high school singles tennis champ of New Jersey. Born in 1912, I didn't even know that Jewish kids could get on tennis courts, back then. He taught my mom, pictured here with him, to play and she became a tournament level player. Condolences on the passing of your dad. Both of my parents are long gone, but never forgotten. Best, Paul

e2776185747a1897a230d67eb0e43f2c.jpg




Sent from my iPad using Tapatalk
 

ugly duck

New User
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you
Condolences for your loss. You were obviously well connected with your father for what I envy you.
 

Imago

Hall of Fame
My heart is with you. I've just got wasted with my dad watching under 21 year old football(soccer) Euro championships after a serve practice with my TC100. The frame is a bliss but having my dad patiently waiting for me and listening to my superior (soccer related) intelligence while drinking rum with a beer back...that's irreplaceable. You're never an adult until you lose your parents...as they say...

That makes three of us. Lost mine two weeks ago... My deepest condolences for your loss.
 

topspn

Legend
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you
So sorry for your loss BHC. And everyone else who lost a parent. It certainly brings things into perpespective with priorities in life. My parents are both older and suffering health issues so I dread the day I loose them.
 

djNEiGht

Legend
@Backhand Compliment Like many here...I'm saddened by your loss. I am however happy and giddy at the experience you shared when you shared the story with your Pop about the engineer background of Paul with. May you be able to bathe in the great memories as you are facing this challenging time.

#talktennisfamily
 

ugly duck

New User
@Backhand Compliment Like many here...I'm saddened by your loss. I am however happy and giddy at the experience you shared when you shared the story with your Pop about the engineer background of Paul with. May you be able to bathe in the great memories as you are facing this challenging time.

#talktennisfamily

You found the words I was looking for!
 

saleem

Semi-Pro
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you

My condolences on the passing of your father @Backhanded Compliment
 

Classic-TXP-IG MID

Hall of Fame
Ok an almost unrelated and passionate post...

Part of the reason I had to try Angell frames is Paul is an engineer, like my Dad. Someone who worked for the big companies for decades but had to work under board room decisions rather than what may or may not be the more ideal design decisions (there is always a tradeoff). He still found a way to do some great things... and years later went out on his own with a small company so he could do things his way. When the ALS disease forced him into retirement he still did some expert consulting.

My Dad was my first tennis coach and hed taken lessons but probably never better than a 3.0 and I remember beating him for the first time when I was 6 or so. Last year I got to show him one of my Angell frames and though he could barely walk wanted to watch me hit with it. He loved the story about an engineer doing it his way and the practical way Paul has gone about making his frames for a customer base that other companies seem to have lost touch with.

He died a few days ago... the disease having not yet taken all of his autonomy... but rapidly progressing.

Life is too short to do things in a way that is throwaway culture and planned obsolescence....

That's all, I will miss him and years ago he gave my his Tony Trabert Wilson Stylist... Yes Ive hit with it... what a beast of a stick. It reminded me a lot of the TC95 except with a tiny 60sq inch head (dang could it serve and hit huge forehands).

Life is too short to not play the game the way you want to. Salutes and big serves Dad... I'll miss you


Condolences to you and your family on the loss of your father. My thoughts are with you at this most difficult of times. I'm glad to hear that tennis is providing you with some source of comfort and connection to your father.
 

4-string

Professional
Played a set and a half with the TC95 again today, and it went well. This time strung up with Pro's Pro Black Out 1.24 at 51/48 lbs, a good match for the TC95 IMO.

It didn't feel quite as solid and substantial as Kirsch Evolution, but other than that I prefer BO over the Kirsch in this frame. BO dies quickly though, but is very affordable and a must buy if you string yourself imo.

I still think I must have gotten grip shape A btw (ordered B) No big deal, but it takes some time to adjust.

TC95 serves bombes, I hit three aces on second serves today. Didn't play the best returner in the world, but still. [emoji3]
 
Whats the stringing pattern (which holes to leave, tie offs...) for the TC97 16x19? Can someone please post pics (single and 2 piece stringing)

Got my TC97 today. Looks and feels amazing. Now to string and play.
 
Having a problem stringing. For the the last cross (doing 2 piece for 16X19), the grommet holes are blocked by the mains. How do i move them? Or did I do something wrong?

I managed to get it done with high difficulty. Using RIP control, so not as easy as a stiff poly.

How do post pics here so I can show you guys what I did?
 
Last edited:

Hoosh

New User
Getting my first Angell next week! TC95 18x20. 330x305. Leather grip. I'm a new poster, but read an awful lot of all of your posts in making this purchase decision. So in addition to my condolences, I just wanted to say thanks! I'll post my thoughts when I get it.

Any stringing advice? I string myself. Current stick is a DR98 with Tonic mains 52lbs and Ashaway monogut 17 crosses 54lbs. This will be my 1st 18x20 on Paul's recommendation. I'm a strong 3.5 with tennis elbow issues. A baseliner with heavy topspin for both fore and back hands (2 handed) and a big kick for both serves (while continuing to heal).


Sent from my iPhone using Tapatalk
 

andyN

Rookie
Whats the stringing pattern (which holes to leave, tie offs...) for the TC97 16x19? Can someone please post pics (single and 2 piece stringing)

Got my TC97 today. Looks and feels amazing. Now to string and play.
the tie-off hole should be the 4th hole up from your last cross. there shouldn't be any main blocking it. Look at the size of the grip hole, its bigger than the other
 
Top