N
NadalFan1990
Guest
YULITLE, this may be a random question, but I was wondering what application you use when you "zip-through" your videos like when you speed up the video at certain points.
Nope. This is what I hope to post soon. Just gotta get my hands on some floating clamps. There is a good vid already about starting your mains with floating clamps. I still hold firm that there is a way to start them without double pulling, as he does.
http://www.youtube.com/watch?v=ktxcs5dUoE8
YULITLE, this may be a random question, but I was wondering what application you use when you "zip-through" your videos like when you speed up the video at certain points.
hey, I have a quick question here. since I'm going to be using hybrids on a microgel Prestige MP (18 x 20 pattern), I'm pretty sure I won't have enough string to reach the tensioner. I've heard people talk about this "reef knot", but I tried it doesn't really work. this is mainly because the other end of the string in the knot is already attached to the racquet, aka the other end of the string is already tensioned, if you understand what I mean. so, what exactly do I do to extend the string to the tensioner? what I'm talking about here, is that the other end of the red string ( in this diagram) is already tensioned inside the racquet, so I cant get it to make the knot.
If you are going to be stringing for a few years, it may be advantages to get a starting clamp, as they are relatively cheap.That way there is no knot slippage for extending the string.
alright, I guess I'll have to buy one.
I have 3 starting clamps, and I like the one I got from gss the best, I think the one I got was $36.00, or close to that.You will not regret it.
Hey yulitle,
I read that you were going to do a video of how to use a tension calibrator. I was wondering when are you going to do it? Because I really need help using it.
YULitle - did you get my email?
Well basically, i was going to buy a cheap fish scale so i could just check my machine. Is there much difference between a cheap one ($15 ) and that of something like the Ultrasport 30?
Thanks
So what would you suggest to calibrate a machine? A spring 1 i think is too unreliabe, especially after a few years
YU, what do you think of this fishing scale?
http://www.amazon.com/Heavy-Duty-Po...e=UTF8&s=sporting-goods&qid=1227914084&sr=8-2
do you mean the trap door thing, or the whole buttcap?
It's tricky because I put weight under my trap door, so I would want to glue it in, but that's an option.
If it's the whole buttcap, you'll need to take the grip off and staple it to the handle
hello YUlitle. Refering to this video, "Starting Crosses with a Starting Clamp," since I have flying clamps instead of fixed clamps, do I double pull the first two crosses, and then continue as normal? or is there a better way to do this. I've just ordered my starting clamp as a benefit of tightening knots, but... how will it assist me in two-piece stringjobs? is the only benefit allowing one to use four finishing knots instead of 3 finishing knots and a starting knot? thanks in advance.
tf15347, check this thread http://tt.tennis-warehouse.com/showthread.php?t=228592 your starting clamp will enable you to re-tension the 1st cross and use a less bulky knot.
I have a question about the starting mains with fixed clamps (not double pulling) video.
in the beginning you pull both mains and then clamp one of the strings opposite to the side that was closest to the gripper. why is this? because you're just going to have to re-tension the string later as you do in the video. also, wouldn't tensioning the string twice affect it's stiffness?
also, i'm not sure if this is the same with manual linear grippers (since you use an electronic on in the video) but with a rotational gripper I cant pull two strings at the same time since I can't make the gripper hold onto the string.
sorry if this has been asked before, just dont' feel like looking over 1800+ posts to find it.
Blast from the past.
Okay, I'm not sure what you mean by clamping the string closest to the gripper because if I was tensioning both center mains, then they would both be "closest."
Yes, tensioning twice does affect stiffness, but it is my belief that it is a better than double pulling for tension (as is customary.)
About the rotational grippers; I've never had trouble pulling two strings with a rotational gripper. The only machine I've seen that I thought might have an issue pulling two at once is the Klippermate.
i have an x-2, soon to get a 602fc, but the former could never do two strings at once. it would just slip.
as for closest to the gripper. it's the side of the racquet that is closed to where the string is being tensioned. in the video this would be the top of the racquet and the opposite side (furthest from the gripper) would be the throat of the racquet.
I see. I am actually tensioning BOTH strings on that first clamp.
If you have fixed clamps, try and tension the 1st main on one side, then tension the 2nd main same side, then tension the 1st main on the opposite side, and you will be able to clamp closer to the racquet frame, as you will not have the clamps that close together to get in the way of positioning where you want them to be.right now i'm only tensioning one string at a time and it seems to work just fine. i hold one string (string 1) with the fixed clamp and tension the other string (string 2). clamp string 2. tension string 1. clamp string 1, though it is far from the grommet because of the first clamp. I tension another string next to string 2. i then retension string 1 and clamp it closer to the grommet.
is there anything wrong with this? cause i still don't know you tension both string at the same time.
If you have fixed clamps, try and tension the 1st main on one side, then tension the 2nd main same side, then tension the 1st main on the opposite side, and you will be able to clamp closer to the racquet frame, as you will not have the clamps that close together to get in the way of positioning where you want them to be.
yea, i was thinking about that when typing it. though i don't want to put that much stress on it by tensioning another string on the same side... though i have to say using fixed clamps does give me a lot more confidence that it won't slip than the plastic floaters on my x-2
well i did a few searches to make sure this is not a duplicate but i feel like someone has mentioned this.
the question is the first and last string on my mains and crosses are not tight enough. i can freely move them up and down but all my other strings are tight. i have a klipper mate stringer. i always try to tie the knots as tight and as close to the grommet hole before releasing the clamp. but i always end in failure. is there a special trick or something that i am missing?
well i did a few searches to make sure this is not a duplicate but i feel like someone has mentioned this.
the question is the first and last string on my mains and crosses are not tight enough. i can freely move them up and down but all my other strings are tight. i have a klipper mate stringer. i always try to tie the knots as tight and as close to the grommet hole before releasing the clamp. but i always end in failure. is there a special trick or something that i am missing?